The recently developed edge tracing (ET) method allows to estimate the radial deformation in axisymmetric tensile specimens via analysis of digital images recorded during the experiments. Images are processed to detect the sample's contours and therefore estimate the minimal cross‐section diameter. This technique was mainly developed to characterize the plastic behavior well beyond the necking strain. The aim of this work is to apply the ET method to two novel case studies. Firstly, the post‐necking behavior and failure of a low ductility Al alloy are investigated. Low ductility alloys tend to fail brutally after reaching the maximum load. The major result is the capture of the sharp load drop which allowed to calibrate parameters of a GTN damage model. Secondly, the anisotropic elastic–plastic behavior of a “vintage” line pipe steel is characterized by a direct measurement of the Lankford coefficient. Assembled experimental data allowed to model the anisotropic plasticity beyond necking in different loading directions.
Laminar pipe flow with a controllable wall swirl has been studied both numerically and experimentally to explore the behavior of inelastic shear-dependent fluids. The pipe consists of two smoothly joined sections that can be rotated independently about the same axis. The circumstance of flow entering a stationary pipe from a rotating pipe (decaying swirl) has been investigated. Numerical parametric studies using both a power-law model and a simplified Carreau model are conducted to investigate the effect of shear-thinning and shear-thickening on the flow structure and the critical swirl ratio required to induce the breakdown at a range of Reynolds numbers. A new method of scaling (i.e., a new Reynolds number) is presented that accounts for the shear-dependent viscosity. Using this Reynolds number, the data for all fluids (shear-thickening, Newtonian, and shear-thinning) approximately collapses. Experimental visualisations using an aqueous solution of xantham gum confirm the conclusions drawn from the numerical results.