1 September 2020 in Chemical Engineering Journal
14 June 2019 in IEEE Transactions on Plasma Science
Triple dc plasma torch system was used for the synthesis of nanoparticles. Three thermal plasma jets are ejected from each plasma torch and they are merged into a strong single plasma plume. Since the feedstock is injected into the jet merging area, this system is suitable for refractory nanoparticle synthesis and enable to high production yield caused by the complete evaporation is possible. In this paper, numerical simulation was carried out to analyze thermal plasma characteristic inside a reactor according to the plasma-forming gas and carrier gas compositions: Ar, Ar-H₂, and Ar-N₂ plasma; Ar, He, and N₂ carrier gas. Then, it was comparatively interpreted with the actually synthesized nanoparticle in order to understand the condensation process of nanoparticles. It was revealed that the thermal environment is able to control readily in the triple torch system by the operating condition depending on the target materials.
24 February 2023 in Journal of Environmental Chemical Engineering
1 February 2022 in Advanced Powder Technology
30 January 2018 in Scientific Reports
Soft shields are required to protect the human body during a radioactive accident. However, the modulus of most soft shields, such as HDPE and epoxy, is high, thereby making it difficult to process them in wearable forms like gloves and clothes. We synthesized a soft shield based on a hydrogel that is very compliant, stretchable, and biocompatible. The shields were fabricated by integrating γ-ray-shield particles into hydrogels with an interpenetrating network. The soft shields containing 3.33 M of PbO2 exhibited a high attenuation coefficient (0.284 cm−1) and were stretched to 400% without a rupture. Furthermore, the fabricated soft shield can be sewn without a fabric support due to its high energy-dispersion ability. A wearable arm shield for the γ-ray radiation was demonstrated using a direct sewing of the soft-shield materials.
21 October 2024 in Chemical Engineering Journal