19 January 2024 in Materials Today
10 November 2022 in Energy & Environmental Science
Solar desalination is a zero-pollution, low-energy, off-grid water purification technology. However, the salt residue after water evaporation seriously threatens the continuous use of a solar thermal system. While the salt accumulation issue has been alleviated by complex processing methods and sophisticated material design, such endeavors significantly increased the cost of processing and manufacturing. Herein, we used the gaps created by imperfect chimerism during the easy assembly of microstructural units to provide a pathway for salt excretion and resolve the salt accumulation issue. A convenient solution for manufacturing a large-scale salt-resistant (SR) system is proposed based on the easy assembly of microstructural units. The SR system achieved record-high energy efficiencies of ∼91.5% and ∼84.42% in up to 20 wt% and 25 wt% sodium chloride solution, respectively, under 1 sun irradiation. Hydrophilic photothermal materials worked stably in 3.5 wt% and supersaturated salt water for more than 180 days and 2000 minutes, respectively, without salt accumulation. The cost of freshwater production by the integrated solar desalination system could be as low as ∼$1 m−3. The SR system fabricated via the one-step easy assembly of photothermal materials provides a promising method for the large-scale application of solar desalination.
1 February 2025 in Green Energy & Environment
10 August 2022 in Journal of Materials Chemistry A
Solar-driven interfacial evaporation is a promising technology to produce clean water from seawater or polluted water. However, the evaporation rate in existing photothermal materials is normally limited to 5 kg m−2 h−1 or below, which makes it hard to fulfil the daily water demand of a family, let alone the enormous water requirements in agricultural and industrial sectors. Herein, under the guidance of computational fluid dynamics (CFD) simulations, a multichannel photothermal rod (MCPR) is proposed as a solar interfacial material for evaporative disposal of real municipal sewage and concurrent production of freshwater. The production rate of the freshwater over a 10 centimetre-high MCPR is 18.8 kg m−2 h−1 under 1 sun, with water quality equivalent to that of commercial pure water. When the light is incident at oblique angles, faster evaporation rates are obtained (e.g., 31.3 kg m−2 h−1 at a 30° angle). Furthermore, the evaporation rate can even be raised to 126.5 kg m−2 h−1 in an outdoor environment via a magnified evaporation system constructed of a 35 centimetre-high MCPR array. These values were achievable due to a series of properties of the MCPR, including antigravity water transport, omnidirectional collection of solar energy, minimization of heat dissipation, and maximization of the evaporation interface.