11 June 2019 in IEEE Transactions on Industrial Electronics
To realize high-performance contouring tracking of dual-linear-motor-driven (DLMD) gantry, both motion coordination of multi-axes and synchronization of redundant actuators are indispensable factors. However, earlier contouring methods of multi-axes systems only focus on motion coordination, leading to certain inherent limitations and uncertainties when applied to DLMD gantry. Especially, the usually ignored synchronization issue may directly affect the normal operation of system. To this end, this paper proposes a novel contouring control method by integrating both motion coordination between axes and synchronization of redundant actuators. With the knowledge of the complete system dynamics, corresponding modification and extension have been done within the framework of global task coordinate frame (GTCF). Subsequently, both associated issues are effectively dealt with in the task space to simultaneously obtain efficient motion coordination ability and high-level synchronization, along with more accurate contouring error calculation. The proposed method is compared to the earlier GTCF based contouring control method without consideration of synchronization issue. The experimental results fully indicate the effectiveness and superiority of the proposed method to indeed guarantee and further improve the contouring performance.
23 January 2018 in IEEE Transactions on Industrial Electronics
Dual-linear-motor-driven gantry systems have been widely used in high-speed or heavy payload precision motion systems. Due to the unique physical properties such as mechanical coupling, the precise synchronization control of such kinds of systems is crucial to achieve good tracking and smooth operation performance. However, the existing synchronization schemes usually focus on the pure motion synchronization only and, thus, have certain inherent performance limitations. In this paper, an accurate multi-input multi-output mathematical model of a dual-driven gantry is presented first, where the complete planar motions of the crossbeam include the traditional linear motion along the guide rails and the previously ignored rotational motion around the mass center. With the better understanding of the mechanical coupling and the internal forces caused by the rotational dynamics, an advanced synchronization control scheme by directly taking into account the additive rotational dynamics is presented, which not only synchronizes the motions of two parallel motors but also regulates the internal forces. In the proposed scheme, the adaptive robust control algorithm is also applied to obtain a guaranteed robust performance in the presence of both parametric uncertainties and uncertain nonlinearities. Comparative experiments with previous control schemes are carried out to show the better synchronization performance and verify the effectiveness of the proposed method.
14 November 2017 in IEEE Transactions on Industrial Informatics
For dual-linear-motor-driven (DLMD) gantry systems widely used in industrial applications, the strong mechanical coupling usually makes it difficult to achieve both good tracking and smooth operation performance simultaneously. In most of the existing control schemes, only the pure motion synchronization is considered, which may produce large internal forces leading to performance degradation and control chattering/saturation. In this paper, an accurate MIMO mathematical model of a DLMD gantry including both the traditional linear motion and the previously ignored rotational motion around the mass center is given, leading to a better understanding of the mechanical coupling and the internal forces caused by the rotational dynamics. Additionally, some physical parameters in the rotational dynamics having significant influences on the synchronization performance are discussed (e.g., the actual centroid position essentially determines the proper thrusts assigned to two parallel motors). An advanced synchronization control scheme is presented subsequently by directly considering the additive rotational dynamics and accurate parameter estimation (e.g., the actual centroid position), which not only synchronizes the motions of two parallel motors but also regulates the internal forces. The technique of integrated desired compensation direct/indirect adaptive robust control (DCDIARC) is applied to synthesize the synchronization controller for both accurate parameter estimation and a guaranteed robust performance to various uncertainties. Comparative experiments with previous control schemes show the effectiveness and better synchronization performance of the proposed method.
1 February 2021 in AIP Advances
To achieve high-accuracy tracking of a dual-linear-motor-driven (DLMD) gantry, high-level synchronization between redundant actuators becomes a non-negligible factor and also a difficult issue to be solved priorly. Especially, when both X and Y axes are simultaneously operating to accomplish complex tasks efficiently, additional coupling effects will be generated by the dynamic load presented on the crossbeam, which makes the synchronization issue more complicated than the case with static load. However, due to the absence of an accurate model to fully reveal the complete coupling characteristics, existing approaches to this issue still have inherent limitations. Therefore, this paper focuses on the systematic physical modeling and synchronization control of a DLMD gantry with a dynamic load presented on the crossbeam. A complete coupling mathematical model is established first, by fully considering two linear motions (X-axis and Y-axis) and also including the additional rotational motion of the crossbeam. Built upon the effective model information, corresponding solutions by compensating the dynamic load effects and actively controlling the rotational dynamics to regulate the internal forces have been proposed, leading to a novel adaptive robust synchronization control method. The results of comparative experiments verify the effectiveness and superiority of the proposed method in dealing with the synchronization issue subjected to dynamic load effects.