A simple off-the-shelf dye molecule, 1,4-dihydroxy-9,10-anthraquinone or quinizarin (1), has been investigated for the effective detection of moisture in organic solvents and building materials. Anion-induced deprotonation of 1 to 1.F followed by re-protonation with water is the working principle of the sensor system. Changes in colour, UV-Vis spectra and emission intensity indicate the moisture detection of 1.F in various organic solvents. The probe 1.F is more effective at the detection of water in acetonitrile and THF with a LOD of 0.0011 and 0.0026 wt%. Probe 1.F is reversible, reusable, highly selective, and sensitive and has a fast response time both in solution phase and in test papers. Probe 1.F is also applied for the detection of unknown moisture content in raw building materials such as cement, fly ash, foundry sand, and limestone. 1.F incorporated cellulose-based papers are applicable for inkless writing and stamping in the read–erase manner. Furthermore, these papers are also suitable for fingerprint imaging and sweat pore mapping by the simple colour change method.
A new Alizarin Red S based fluorescent probe ARS–Zn(II) has been reported for the detection of H2S in aqueous buffer solution. In the presence of zinc ions, ARS displayed an increase in fluorescence intensity through the formation of an ARS–Zn(II) ensemble. The addition of H2S to the ensemble caused the disassembly of the metal and ARS, which restored the fluorescence intensity of ARS. This sensing ensemble exhibited H2S-selectivity over other biothiols and biologically relevant analytes. The calculated detection limit of ARS–Zn(II) with H2S was 92 nM. ARS–Zn(II) also detected H2S in serum under physiological conditions. Moreover, as a practical application, it could be used for the real time monitoring of H2S released from the H2S-donor molecule benzoic (methyl carbonic) dithioperoxyanhydride and also applied to live cell imaging. The reported ensemble ARS–Zn(II) has advantages like ready availability, high selectivity with good sensitivity, fast response time, higher excitation (520 nm) and emission (625 nm) wavelengths and real time fluorescence assay with H2S donors.