1 November 2008 in Journal of Materials Processing Technology
16 March 2010 in Natural Hazards and Earth System Sciences
On 6 April 2009 an earthquake of magnitude 6.3 occurred in L'Aquila city, Italy. In the city center and surrounding villages many masonry and reinforced concrete (RC) buildings were heavily damaged or collapsed. After the earthquake, the inspection carried out in the region provided relevant results concerning the quality of the materials, method of construction and the performance of the structures. The region was initially inhabited in the 13th century and has many historic structures. The main structural materials are unreinforced masonry (URM) composed of rubble stone, brick, and hollow clay tile. Masonry units suffered the worst damage. Wood flooring systems and corrugated steel roofs are common in URM buildings. Moreover, unconfined gable walls, excessive wall thicknesses without connection with each other are among the most common deficiencies of poorly constructed masonry structures. These walls caused an increase in earthquake loads. The quality of the materials and the construction were not in accordance with the standards. On the other hand, several modern, non-ductile concrete frame buildings have collapsed. Poor concrete quality and poor reinforcement detailing caused damage in reinforced concrete structures. Furthermore, many structural deficiencies such as non-ductile detailing, strong beams-weak columns and were commonly observed. In this paper, reasons why the buildings were damaged in the 6 April 2009 earthquake in L'Aquila, Italy are given. Some suggestions are made to prevent such disasters in the future.
1 July 2008 in Journal of Materials in Civil Engineering
In this study, the effects of the use of corncob, wheat straw, and plane leaf ashes (CA, WSA, and PLA) as mineral admixtures on concrete durability were investigated. Ten concrete mixtures were produced in three series with control mixes having 400 kg cement content. The control mixes were modified with 2, 4, and 6% of CA, WSA, and PLA in place of fine aggregate. To establish the durability of concrete, the compressive strengths were measured after 7, 28, 90, 180 days, and 18 months under sodium sulfate solution. In the meantime, abrasion resistance and water penetration were investigated. Test results indicate that CA, WSA, and PLA addition provides good workability and abrasion resistance compared to conventional concrete. Test results also showed that minimum abrasion resistance is obtained from the control specimen, while maximum abrasion resistance is obtained from CA3 (6%) specimens. Abrasion resistance is increased as the rate of fine CA, WSA, and PLA is increased. The results indicate that the inc...
1 February 2009 in Construction and Building Materials
1 June 2004 in Engineering Failure Analysis
1 July 2008 in Construction and Building Materials