Stephen C. Bates

Stephen C. Bates

Auto-generated profile, based on publicly available information

Stephen C. Bates

Thoughtventions Unlimited LLC

Research Focus & Metrics

Academic Career Length

45Years (1982-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 June 1984 in Review of Scientific Instruments
Verified
Journal Article
Closed access
PDF file
SBS. C. Bates
S. C. Bates
KBK. H. Burrell
K. H. Burrell
A system has been developed for fast, feedback controlled injection of hydrogen and various other gases into a vacuum system. Gas flow is through short (about 30-mm length), submillimeter diameter tubing at pressures in the fluid flow regime. The flow is controlled by a piezoelectric valve and measured by a miniature pressure sensor mounted in the body of the valve. Flow rates from a single valve of up to 500 Torr liter/s for hydrogen have been obtained. Response time of the flow is a rise time of 0.5 ms (with a 3-ms ringing decay time) and a fall time of 0.3 ms. The flow rate is basically a linear function of the measured pressure. A model has been developed to explain the observed functional dependence of flow rate on pressure, gas type, and tube radius.

1 March 1983 in Nuclear Fusion
Verified
Journal Article
Closed access
PDF file
GNG.H. Neilson
G.H. Neilson
ELE.A. Lazarus
E.A. Lazarus
MMM. Murakami
M. Murakami
AWA.J. Wootton
A.J. Wootton
JDJ.L. Dunlap
J.L. Dunlap
WWW.R. Wing
W.R. Wing
Experiments to investigate the scaling of volume-averaged beta <β> and a global energy confinement time for neutral-beam-heated (Pb ≤ 2.5 MW) discharges in the ISX-B tokamak are described. The results are condensed into a set of empirical scaling formulas which can be used as a guide for other theoretical and experimental studies of confinement in high-beta, neutral-beam-heated plasmas. The dependence on toroidal field BT, plasma current Ip, and line-averaged electron density e was determined by varying each of these while keeping other external variables fixed. Magnetic diagnostics were used to obtain global properties, and Thomson-scattering-based profile analysis was carried out to permit more detailed investigation of selected cases. The poloidal beta, βp, is found to be independent of BT and e at fixed beam power Pb; confinement is found to deteriorate with increasing Pb but to improve with IP, consistent with previous results. The mechanisms which govern this confinement scaling have not been discerned, but it apparently does not depend on β, BT, or the (m = 1; n = 1) MHD activity, which typically dominates the MHD diagnostic signals. Losses are primarily through the electron channel, and the scaling of electron energy confinement time is similar to that of .

1 September 1989 in SAE International Journal of Advances and Current Practices in Mobility
Verified
Conference Paper
Closed access
SBStephen C. Bates
Stephen C. Bates
Sets of sequential-cycle instantaneous flame images are used to study cycle-by-cycle variation of lean combustion in a spark-ignition four-stroke optical engine. Stereo gated image-intensified NTSC video cameras record flame radiation to show three-dimensional structure, while flame development is measured in each cycle by super-imposing early and later flame images. A variety of physical causes for cyclic variation are identified from the images. Correlations of flame geometry with mass burned fraction show that a larger initial flame kernel size results in a faster early burn in the cycle, and that flames that are flatter on a large scale cause lower peak burn rates than round flames. The early flame kernel is shown to vary greatly in size, shape, and location. This kernel has a major effect on combustion by setting the basic flame shape in mid-cycle. Large scale unstable flows appear to cause major cyclic variation in flame shape and combustion, an effect seen at 500 rpm, but which has disappeared at 1000 rpm.

1 March 1985 in Nuclear Fusion
Verified
Journal Article
Closed access
PDF file
SSS.D. Scott
S.D. Scott
JLJ.F. Lyon
J.F. Lyon
JMJ.K. Munro
J.K. Munro
DSD.J. Sigmar
D.J. Sigmar
SBS.C. Bates
S.C. Bates
AWA.J. Wootton
A.J. Wootton
The effect of periodic toroidal field (TF) ripple on ion confinement has been studied in the ISX-B tokamak by comparing neutral-beam-heated plasma performance with 9 and 18 TF coils. Three ripple physics issues were treated by these experiments: (1) enhanced ion thermal conductivity, (2) enhanced loss of energetic ions, and (3) ripple damping of beam-induced toroidal plasma rotation, which may affect the plasma losses. Under a wide variety of plasma conditions, ripple reduced the central-ion temperature by a factor of approximately two (600 eV → 300 eV). Ion temperature was found to be nearly independent of applied neutral-beam power in the large ripple configuration (9 TF coils). These results are shown to be in reasonable agreement with theoretical models of ripple transport. Charge-exchange measurements of the fast-neutral flux indicated no loss of fast passing ions due to ripple, but a large depletion of the fast ions trapped in local ripple wells, as expected theoretically. The central toroidal rotation velocity was reduced by a factor of six by ripple, yielding a momentum confinement time substantially less (factor of about seven) than that expected from standard theoretical expressions for ripple-enhanced ion viscosity.

1 February 1988 in SAE International Journal of Advances and Current Practices in Mobility
Verified
Conference Paper
Closed access
SBStephen C. Bates
Stephen C. Bates
A single-cylinder research engine for flow and combustion visualization has been designed, built, and operated. It has a transparent liner and piston-top window that maximize optical access for inspecting in-cylinder flow and combustion. It is an overhead cam engine with a three valve head, nominal 9:1 compression ratio, 92 mm bore and stroke, and maximum speed of 4000 r/min. The engine design is described, and some preliminary results are given. The engine has been motored with a glass liner and fired with a stainless steel liner before a sapphire liner is installed for combustion visualization.

1 February 1989 in SAE International Journal of Advances and Current Practices in Mobility
Verified
Conference Paper
Closed access
PDF file
SBStephen C. Bates
Stephen C. Bates
The behavior of combustion in a realistic SI Four-Stroke engine with a transparent liner and piston top is studied using stereo gated image-intensified NTSC video cameras to record instantaneous flame position. Flame development is measured by double exposing each frame at different crank angles in a single cycle. The images are digitized and analysed with a PC-based image processing system. A complete cylinder pressure history of the propane fuelled combustion is combined with the flame images to study each cycle at different equivalence ratios, concentrating on lean combustion. Cycle-by-cycle variation is explored at 500 rpm, and a generic lean-limit combustion oscillation caused by changing residual gas is described and explained. The effect of engine swirl on the flame is shown, and the development of the early flame kernel relative to the spark plug. Flame shapes are polygonal in each cycle rather than spherical, with occasional large variations due to the flow. Lean fuelling cycles with no apparent heat release all have visible flames.