The estimation of the capacity and settlement of landfills is critical to successful site operation and future development of a landfill. This paper reports the results of a study on biodegradation behavior and the compression of municipal solid wastes. An experimental apparatus was developed which had a temperature-control system, a leachate recycling system, a loading system, and a gas and liquid collection system. Experiments were performed both with and without optimal biodegradation for comparative purposes. Test results indicated that settlement resulting from creep was relatively insignificant when the biodegradation process was inhibited. Compression due to decomposition under optimal biodegradation conditions was found to be much larger than compression associated with creep. The biodegradation process was significantly influenced by the operational temperature. A one-dimensional model is proposed for calculating settlement and estimating the capacity of the landfill under relatively optimal biod...
Low-permeability slurry trench cutoff walls are commonly constructed as barriers for containment of subsurface point-source pollution or as part of seepage-control systems on contaminated sites. A method to estimate wall thickness in slurry wall design is proposed based on decoupling the advective and dispersive components of contaminant fluxes through the wall. The relative error of the result obtained by the proposed method compared with that by an analytical solution was found to increase as the ratio of the specified breakthrough exit concentration (c*) to the source concentration (c0) increased. For c*/c0 of less than 0.1, which covers common practical situations, the relative error was not greater than 4% and was always conservative, indicating that the proposed method provides sufficient accuracy for design. For a given breakthrough criterion (i.e., c*/c0), the relative error was low for the scenarios having either a low or high column Peclet number, where either dispersion or advection dominates the contaminant migration, respectively, and the relative error was high for the scenario having an intermediate column Peclet number, in which case the coupling effect of advective and dispersive migrations is relatively high.
Heavy metal contamination has long been a tough challenge. Recently, enzyme-induced carbonate precipitation (EICP) has been proposed to handle this problem. This paper aims to explore the efficacy, process, and mechanisms of EICP using crude sword bean urease extracts to remediate Zn2+, Ni2+, and Cr(VI) contamination. A series of liquid batch tests and geochemical simulations, as well as microscopic analyses, were conducted. The liquid batch test results show that Zn2+, Ni2+, and Cr(VI) can be effectively immobilized by the EICP method, and the highest immobilization percentage was observed for Zn2+, reaching up to 99%. Ni2+ and Cr(VI) were immobilized at 62.4% and 24.4%, respectively. Additionally, the immobilization percentage of heavy metals increased with the concentration of added Ca2+. The simulation results and XRD results reveal that the organic molecules in crude sword bean urease can promote ZnCO3, Zn(OH)2, Zn5(CO3)2(OH)6, and NiCO3 precipitation. The FTIR and SEM-EDS results provide evidence for heavy metal adsorption by the functional groups in crude urease and calcium carbonate. The liquid batch test results, as well as the simulation results and the microscopic analysis results, indicate that the mechanism of EICP in heavy metal remediation can be summarized as biomineralization to form heavy metal carbonate precipitates and metal hydroxide precipitates, adsorption by calcium carbonate, and adsorption or complexation or promoting nucleation by organic molecules.
The biodegradation behavior of municipal solid waste (MSW) depends on the diversity and metabolic function of bacterial communities, which are affected by environmental factors. However, the diversity of the bacterial communities and metabolic functions in MSW, as well as their influencing factors, remain unclear. In deep-aged MSW, the abovementioned deficiencies are more significant, and will effectively hamper landfill disposal. In this study, high-throughput sequencing was performed to examine the bacterial community structure and metabolic function from depths of 10 m to 40 m, of two large MSW landfills on the southeast coast of China. Thermotogota (1.6–32.0%), Firmicutes (44.2–77.1%), and Bacteroidota (4.0–34.3%) were the three dominant phyla among the 39 bacterial phyla identified in aged MSW samples. Bacterial genera associated with the degradation of many macromolecules, e.g., Defluviitoga, Hydrogenispora, and Lentimicrobium were abundantly detected in MSW samples, even in aged MSW. Redundancy analysis (RDA) showed that bacterial diversity in the landfills was most strongly correlated with electrical conductivity, age, and moisture content of the MSW. Tax4fun2 analysis predicted that there were abundant metabolism functions in aged MSW, especially functional enzymes (e.g., glycine dehydrogenase and cellulase) related to amino acids and cellulose degradation. This study increases our understanding of the bacterial diversity and functional characteristics in landfilled MSW.