15 February 2019 in IEEE Transactions on Vehicular Technology
Establishing and maintaining end-to-end connections in a vehicular ad hoc network (VANET) is challenging due to the high vehicle mobility, dynamic inter-vehicle spacing, and variable vehicle density. Mobility prediction of vehicles can address the aforementioned challenge since it can provide better routing planning and improve overall VANET performance in terms of continuous service availability. In this paper, a centralized routing scheme is proposed for VANET assisted by an artificial intelligence-powered software-defined network (SDN) controller. Specifically, the SDN controller can perform accurate mobility prediction through advanced artificial neural network (ANN) technique. Then, based on the mobility prediction, the successful transmission probability and the average delay of each vehicle's request under frequent network topology changes can be estimated by the roadside units (RSUs) or the base station (BS). The estimation is performed based on a stochastic urban traffic model that the vehicle arrival follows a non-homogeneous Poisson process (NHPP). The SDN controller gathers network information from RSUs and BS which are considered as the switches. Based on the global network information, the SDN controller computes optimal routing paths for switches (i.e., BS and RSU). While the source vehicle and destination vehicle are located in the coverage area of the same switch, further routing decision will be made by the RSUs or the BS independently to minimize the overall vehicular service delay. The RSUs or the BS schedules the requests of vehicles by either vehicle-to-vehicle (V2V) or vehicle-to-infrastructure (V2I) communication, from the source vehicle to the destination vehicle. Simulation results demonstrate that our proposed centralized routing scheme outperforms others in terms of transmission delay, and the transmission performance of our proposed routing scheme is more robust with varying vehicle velocity.
30 August 2018 in IEEE Transactions on Vehicular Technology
Technological evolutions in the automobile industry, especially the development of connected and autonomous vehicles, have granted vehicles more computing, storage, and sensing resources. The necessity of efficient utilization of these resources leads to the vision of vehicular cloud computing (VCC), which can offload the computing tasks from the edge or remote cloud to enhance the overall efficiency. In this paper, we study the problem of computation offloading through the vehicular cloud (VC), where computing missions from edge cloud (EC) can be offloaded and executed cooperatively by vehicles in VC. Specifically, computing missions are further divided into computing tasks with interdependency and executed in different vehicles in the VC to minimize the overall response time. To characterize the instability of computing resources resulting from the high vehicular mobility, a mobility model focusing on vehicular dwell time is utilized. Considering the heterogeneity of vehicular computing capabilities and the inter-dependency of computing tasks, we formulate an optimization problem for task scheduling, which is NP-hard. For low complexity, a modified genetic algorithm (MGA) based scheduling scheme is designed where integer coding is used rather than binary coding, and relatives are defined and employed to avoid infeasible solutions. In addition, a task load based stability analysis of the VCC system is presented for the cases where some vehicles within the VC are offline. Numerical results demonstrate that the proposed scheme can significantly improve the utilization of computing resources while guaranteeing low latency and system stability.
2 July 2014 in IEEE Transactions on Vehicular Technology
Real-time path planning can efficiently relieve traffic congestion in urban scenarios. However, how to design an efficient path-planning algorithm to achieve a globally optimal vehicle-traffic control still remains a challenging problem, particularly when we take drivers' individual preferences into consideration. In this paper, we first establish a hybrid intelligent transportation system (ITS), i.e., a hybrid-VANET-enhanced ITS, which utilizes both vehicular ad hoc networks (VANETs) and cellular systems of the public transportation system to enable real-time communications among vehicles, roadside units (RSUs), and a vehicle-traffic server in an efficient way. Then, we propose a real-time path-planning algorithm, which not only improves the overall spatial utilization of a road network but reduces average vehicle travel cost for avoiding vehicles from getting stuck in congestion as well. A stochastic Lyapunov optimization technique is exploited to address the globally optimal path-planning problem. Finally, the transmission delay of the hybrid-VANET-enhanced ITS is evaluated in VISSIM to show the timeliness of the proposed communication framework. Moreover, system-level simulations conducted in Java demonstrate that the proposed path-planning algorithm outperforms the traditional distributed path planning in terms of balancing the spatial utilization and drivers' travel cost.
21 July 2016 in IEEE Transactions on Smart Grid
A vehicle-to-vehicle (V2V) energy swapping strategy can provide an alternative fast charging way for plug-in electric vehicles (PEVs) to relieve the charging overload problem in the power system during peak-demand hours. The main challenges in designing an efficient V2V energy swapping strategy are: 1) to stimulate mobile PEVs to participate in an energy swapping transaction that balances supply with demand at aggregators and 2) to achieve optimal energy utilization and individual PEVs' profits. In this paper, we present a novel smart grid architecture with enhanced communication capabilities for mobile PEVs, via a heterogeneous wireless network-enhanced smart grid. We propose an online V2V energy swapping strategy based on price control. Specifically, mobile PEVs with surplus energy are motivated by getting paid to contribute to a V2V energy swapping transaction at aggregators with energy-hungry PEVs. To evaluate the performance of the proposed V2V energy swapping strategy, a realistic suburban scenario is developed in VISSIM to track the PEVs' mobility using the generated simulation traces. Extensive simulation results are given to demonstrate the efficacy of the proposed V2V energy swapping strategy.
11 January 2022 in IEEE Transactions on Vehicular Technology
In the context of complex and dynamic marine environment, the offloading of computing tasks for ships of Internet of Things (IoT) users is a very challenging problem considering the different quality of service (QoS) requirements of maritime applications. Mobile edge computing driven by powerful computing capability and edge intelligence is taken as a promising solution, especially for the resource-constrained and delay-sensitive maritime IoT users. In this paper, we study the optimal edge server selection problem for ship IoT users to jointly minimize the latency and energy consumption for task offloading. Specifically, we first propose a novel space-air-ground-edge (SAGE) integrated maritime network architecture to offload computation-intensive IoT services at sea. Then, the latency and energy consumption of data transmission and processing during offloading are modelled. Based on the models, the edge server selection problem is formulated into a Multi-Armed Bandits learning problem, with considering the task latency requirement and energy budget. To achieve the optimal solution, a novel algorithm, referred to as UCB1-ESSS, is developed, which links the latency, energy consumption, and network constraints by introducing both reward and cost. The simulation results show that the proposed algorithm can achieve considerably lower offloading latency and weighted latency-energy cost compared with the traditional algorithms under different QoS requirements, which proves the efficacy of theproposed algorithm.
10 August 2021 in IEEE Transactions on Vehicular Technology
In this paper, we investigate the joint sub-channel and power allocation problem for cellular vehicle-to-everything (V2X) communications, where multiple vehicle-to-infrastructure (V2I) users share the spectrum resources with vehicle-to-vehicle (V2V) users. In particular, a novel channel state information (CSI)-independent decentralized algorithm based on multi-agent reinforcement learning (MARL) is proposed to maximize the sum throughput of V2I links while meeting the latency and reliability requirements of V2V links. Specifically, we implement the individual double dueling deep recurrent Q-networks (D3RQN) and the carefully designed common reward to train the implicitly collaborative agents, through which, each agent optimizes the policy individually based solely on local CSI-independent observations. To handle the non-stationarity induced by multi-agent concurrent learning, we incorporate hysteretic Q-learning and concurrent experience replay trajectory (CERT) to stabilize the training process. Besides, we incorporate the approximate regretted reward (ARR) to alleviate the unstable reward estimation problem caused by shifting environment dynamics. Simulation results demonstrate that the proposed algorithm outperforms the baselines and can achieve close performance compared with the centralized Brute-force method. Furthermore, the proposed CSI-independent design exhibits comparable performance as the CSI-involved version, which sheds some light on the potential to further reduce the signalling overhead of machine learning-based vehicular communication systems.