This article reviews the history and current progress in high-mobility strained Si, SiGe, and Ge channel metal-oxide-semiconductor field-effect transistors (MOSFETs). We start by providing a chronological overview of important milestones and discoveries that have allowed heterostructures grown on Si substrates to transition from purely academic research in the 1980’s and 1990’s to the commercial development that is taking place today. We next provide a topical review of the various types of strain-engineered MOSFETs that can be integrated onto relaxed , including surface-channel strained Si - and -MOSFETs, as well as double-heterostructure MOSFETs which combine a strained Si surface channel with a Ge-rich buried channel. In all cases, we will focus on the connections between layer structure, band structure, and MOS mobility characteristics. Although the surface and starting substrate are composed of pure Si, the use of strained Si still creates new challenges, and we shall also review the literature on short-channel device performance and process integration of strained Si. The review concludes with a global summary of the mobility enhancements available in the SiGe materials system and a discussion of implications for future technology generations.
We have fabricated strained Ge channel p-type metal–oxide–semiconductor field-effect transistors on virtual substrates. The poor interface between silicon dioxide and the Ge channel was eliminated by capping the strained Ge layer with a relaxed, epitaxial silicon surface layer grown at 400 °C. Ge fabricated from this structure show a hole mobility enhancement of nearly eight times that of co-processed bulk Si devices, and the Ge MOSFETs have a peak effective mobility of 1160 cm2/V s. These MOSFETs demonstrate the possibility of creating a surface channel enhancement-mode MOSFET with buried channel-like transport characteristics.
Recent experimental measurements have shown that in GaAs with elevated threading dislocation densities (TDDs) the electron lifetime is much lower than the hole lifetime [C. L. Andre, J. J. Boeckl, D. M. Wilt, A. J. Pitera, M. L. Lee, E. A. Fitzgerald, B. M. Keyes, and S. A. Ringel, Appl. Phys. Lett. 84, 3884 (2004)]. This lower electron lifetime suggests an increase in depletion region recombination and thus in the reverse saturation current ( for an diode compared with a diode at a given TDD. To confirm this, GaAs diodes of both polarities were grown on compositionally graded (SiGe) substrates with a TDD of . It is shown that the ratio of measured values is consistent with the inverse ratio of the expected lifetimes. Using a TDD-dependent lifetime in solar cell current–voltage models we found that the , for a given short-circuit current, also exhibits a poorer TDD tolerance for GaAs solar cells compared with GaAs solar cells. Experimentally, the open-circuit voltage for the GaAs solar cell grown on a SiGe substrate with a TDD of was which was significantly lower than the measured for a GaAs solar cell grown on SiGe at the same TDD and was consistent with the solar cell modeling results reported in this paper. We conclude that polarity GaAs junctions demonstrate superior dislocation tolerance than configured GaAs junctions, which is important for optimization of lattice-mismatched III–V devices.
Dual junction GaInP/GaAs solar cells have been grown and fabricated on Si substrates using relaxed, compositionally graded SiGe buffer layers that provide a nearly lattice-matched low threading dislocation Ge surface for subsequent cell growth. The dual junction cells on SiGe/Si displayed high open circuit voltages in excess of 2.2 V, compared to 2.34 V for control cells on GaAs, that are consistent with maintaining the 1.8/spl times/10/sup 6/ cm/sup -2/ threading dislocation density throughout the cell structure. Even with total current output limited by large grid coverage and high reflectance, total area AM1.5G efficiency is 16.8%, with active area efficiency at 18.6%. The high V/sub oc/ establishes that SiGe metamorphic buffers are viable for integrating III-V multijunction cells on Si in a monolithic process.
We report a study on Ge diffusion and its impact on the electrical properties of metal-oxide-semiconductor (MOS) device. It is found that Ge diffusion depends on the amount of formed at the interface and can be retarded by surface nitridation. It is speculated that Ge diffusion is in the form of GeO or Ge-riched HfGeO. Effective suppression of Ge diffusion by nitridation has resulted in improved electrical properties of MOS device, including equivalent oxide thickness (EOT), leakage current, hysteresis, and interface state density. The degradation of leakage current after high temperature post metallization anneal (PMA) is found to be due to Ge diffusion.