24 September 2018 in Materials Research Express
In this study, the phase transformation mechanism of a high-alumina fly ash (HAFA)–Na2CO3 mixture was investigated by temperature- and time-programmed heating in a muffle furnace. The temperature range was 600–1000 °C, and the time interval was 20–120 min. The mass loss behaviour of the HAFA–Na2CO3 mixture was investigated by a thermogravimetric analysis method using argon at a heating rate of 10 °C/min. It was found that HAFA without any added flux showed no loss or gain of any element or material under the experimental conditions. The results also showed that HAFA hardly contained any volatile water, carbon, sulphur, or other components. The decomposition of Na2CO3 occurred at 844 °C, and the HAFA–Na2CO3 mixture began to react at 600 °C, indicating that the reaction of HAFA with Na2CO3 started before the decomposition of Na2CO3. The phase transformation of the HAFA–Na2CO3 mixture at different temperatures for 60 min or at 900 °C for different times was investigated by X-ray diffraction. Each reaction required different temperature conditions, and at a specific temperature, the length of the heating time affected the progress of the reaction.
22 August 2018 in Materials Research Express
1 February 2020 in Materials Research Express
In this study, Na2CO3 was used as activator to roast and activate high-alumina fly ash (HAFA), and the vacuum roasting technology was used to enhance the activation process of HAFA. The effects of the vacuum conditions on the activation of HAFA roasted using conventional and microwave heating were investigated. It was determined that the reaction time was shortened and the activation effect of HAFA was improved under vacuum conditions; however, the effect of the vacuum conditions on the roasting temperature was negligible. The activation process of HAFA-Na2CO3 mixtures (HAFA/Na2CO3 mass ratio of 1:1) was promoted by conducting conventional and microwave heating experiments under vacuum (−0.04 MPa). The leaching rate of aluminium of 93.00% was reached at the roasting temperature of 900 °C after only 20 min when the HAFA-Na2CO3 mixture was subjected to conventional heating under vacuum, and after 60 min when conventional heating occurred under normal atmospheric pressure. Moreover, the leaching rate of aluminium of 96.00% was reached at the roasting temperature of 700 °C after only 20 min when the HAFA-Na2CO3 mixture underwent microwave heating under vacuum, and after 30 min when microwave heating occurred under normal atmospheric pressure.