The article presents the results of the industrial application of gel polymer treatment of injection wells to enhance the oil recovery of high-viscosity oil in one of the fields of the Mangystau region (Kazakhstan). The theoretical foundations of the formation of the spatial gel structure of polyacrylamide in interaction with trivalent chromium ions are considered. The results of treatment of four injection wells with a viscoelastic compound (VC) based on polyacrylamide grade FP-307 and chromium acetate with a total volume of 300 m3 each are presented. It has been shown that the injection of gel–polymer compositions makes it possible to redistribute filtration flows in the bottomhole zone, involve low-permeability layers in development, and increase the oil flow rate of responding offset production wells by an average of 0.3-0.6 t/day while reducing the produced-fluid water cut by 2–10 percentage points. The duration of the effect on individual wells exceeds 200 days. A comparative analysis was carried out with global polymer flooding projects, including Pelican Lake (Canada), Daqing (China) and Uzen (Kazakhstan) fields. The technology has shown high adaptability and the absence of critical injection complications associated with premature gelation in the equipment, which confirms the correctness of the selected rheological parameters of the composition for reservoir conditions. The results obtained confirm the expediency of using gel polymer technologies to recover hard-to-recover viscous oil reserves from heterogeneous reservoirs of viscous oils from heterogeneous reservoirs.
This article addresses the enhancement of mature oil field development efficiency through nonstationary (cyclic) waterflooding in complex terrigenous reservoirs. The study includes geological and field analysis alongside evaluation of pilot trial results conducted across three pilot sectors at the IV stage of development in Western Kazakhstan fields. Geo-physical criteria for selecting candidate wells and sectors for cyclic stimulation are substantiated, and mathematical equations for calculating injection half-periods and cycles are detailed. A technique for calculating incremental oil production based on displacement characteristics is presented. Field monitoring data demonstrate that non-stationary waterflooding redistributes filtration flows, sweeps previously undrained layers into development, reduces water cut, and provides technological incremental oil production.
The article discusses the application of the method of hydrogen thermogasochemical effect (HGH) on the bottom-hole zone of the reservoir in order to intensify oil production in conditions of high waterlogging and paraffination. The analysis of the mechanism of action, including thermal, gas-dynamic and chemical effects, is presented. Using the example of well No. 359 of the West Kazakhstan field, an assessment of the technology's effectiveness was carried out. It has been established that the use of THC provides a multiple increase in oil production (up to 35 times) and a significant reduction in waterlogging of products. For the first time, a quantitative assessment of the contribution of each of the three mechanisms (thermal, gas-dynamic, chemical) to the overall increase in productivity based on factor decomposition has been performed for this field. A comparative analysis was carried out with alternative methods of intensification (steam-thermal effect, hydrochloric acid treatment, hydraulic fracturing). It is shown that the main contribution to the increase in productivity is made by the complex effect of active gases, the temperature factor and intra-reservoir chemical reactions. The results obtained confirm the prospects of using the method for the development of depleted deposits with high-viscosity oils.