The corrosion behavior of aluminum 1060 in hydrated salt phase change materials (PCM) melts comprised of Na2HPO4·12H2O - Na2SO4·10H2O was investigated through electrochemical tests as a function of pH. The pH of PCM medium was adjusted by adding H2SO4or NaOH. Electrochemical impedance spectroscopy reveals the existence of concentration difference layer at aluminum/PCM interface ascribed to the adsorption of PCM species and the formation of aluminum oxides. The observed anodic branch of DC polarization exhibits potential independence which is ascribed to the formation of surface oxide film and the accumulation of hydrogen molecules inside surface pores. The oxide film formed at neutral condition is characterized as the most compact and corrosion resistant while as the environmental pH shifts away from 7 the oxides/aluminum dissolution is accelerated and more aluminum 1060 substrate is exposed.
The corrosion behaviours of stainless steel 316 (SS-316), copper (Cu) and aluminium 1060 (Al-1060) in composite molten hydrate salt phase change materials (PCM) composed of Na2HPO4·12H2O – Na2SO4·10H2O have been studied by electrochemical measurements in conjunction with SEM and XRD. The corrosion resistance of the metals in the composite molten PCM follows SS-316 > Cu > Al-1060. The role of the composite molten PCM affecting the corrosion resistance and its mechanisms of the metals are as following: the experiments reveal that SS-316 readily gets passivated in the composite molten PCM medium with no considerable corrosion; Cu suffers an initial rapid anodic dissolution which is further impeded by the formation of spot-like salt precipitates on the substrate, mainly consisting of CuHPO4·nH2O, CuSO4·nH2O and Cu2O; Al-1060 shows a continuous large dissolution in the studied PCM with a porous corroded surface morphology due to the complete destruction of passive film under the attack of OH- ions.
1 May 2020 in Proceedings of the Institution of Civil Engineers - Energy
Thermochemical heat-storage materials such as magnesium, zinc and iron sulfates offer high energy-storage densities and a reliable means of long-term storage of solar energy. In this research study, the dynamic properties of these three salts were investigated based on their hydration and dehydration characteristics. To investigate the effect of regeneration temperatures on the physio-chemical properties of the materials, four sets of temperatures were used. At 100°C, zinc sulfate showed a significant loss of water as compared to magnesium and iron salts, while in the hydration process at lower temperatures, zinc sulfate showed the highest sorption enthalpy and energy density. Furthermore, the crystallinity of salt hydrates was characterised using powder X-ray diffraction measurements, which revealed that dehydration of water molecules occurred only in magnesium sulfate, whereas partial distortion occurred in iron sulfate with a rise in temperature. Collating the results together indicated that zinc sulfate is more energy efficient than both magnesium and iron sulfate. With a calculated hydration energy density at 100°C of 1·26 GJ/m3, zinc sulfate is the best option among the three salts for its use as a thermochemical material.