15 April 2008 in Journal of Mechanical Design
Parallel manipulators feature relatively high payload and accuracy capabilities compared to their serial counterparts. However, they suffer from small workspace and low maneuverability. Kinematic redundancy for parallel manipulators can improve both of these characteristics. This paper presents a family of new kinematically redundant planar parallel manipulators with six actuated-joint degrees of freedom based on a 3-PṞRR architecture obtained by adding an active prismatic joint at the base of each limb of the 3-ṞRR manipulator. First, the inverse displacement of the manipulators is explained, then their reachable and dexterous workspaces are obtained. Comparing the proposed redundant manipulators to the original 3-ṞRR nonredundant manipulator, both reachable and dexterous workspaces are substantially larger. Next, the Jacobian matrices of the manipulators are derived, and different types of singularities are analyzed and demonstrated. It is shown that the vast majority of singularities can be avoided by using kinematic redundancy.
24 April 2012 in Journal of Mechanisms and Robotics
In this work, a new approach for motion planning of kinematically redundant parallel manipulators is proposed and compared with a method previously proposed by the authors called point-to-point motion planning (PPMP). Overall motion planning (OMP) consists of determining actuation schemes that optimize the manipulator’s performance while considering the entire given trajectory of the end-effector at once. The results of OMP are compared with those of PPMP of a kinematically redundant manipulator. It is shown that the proposed OMP strategy can generate actuation schemes for given trajectories such that the manipulator avoids singular configurations better than the PPMP strategy.
1 March 2010 in Transactions of the Canadian Society for Mechanical Engineering
The singularities for a class of kinematically simple 7-jointed revolute manipulators are found. Within the class, unnecessary lengths and 4-jointed spherical groups of joints are avoided, and successive joints are perpendicular or parallel. Four different joint layouts are required to complete this class. The concept of screw reciprocity is used to find the singular (velocity-degenerate) configurations. Reciprocal screw quantities characterizing the lost instantaneous motions are derived.
28 January 2012 in Mechanism and Machine Theory
26 January 2021 in Robotica
SUMMARY This paper presents a methodology to obtain the wrench capabilities of a kinematically redundant planar parallel manipulator using a wrench polytope approach. A methodology proposed by others for non-redundant and actuation-redundant manipulators is adapted to a kinematically redundant manipulator. Four wrench capabilities are examined: a pure force analysis, the maximum force for a prescribed moment, the maximum reachable force, and the maximum moment with a prescribed force. The proposed methodology, which finds the exact explicit solution for three of the four wrench capabilities, does not use optimization and is very efficient.