22 March 2022 in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
A well-focused and high-resolution inverse synthetic aperture radar (ISAR) image of ship target is appropriate to the target classification and recognition, especially for the ISAR image presenting the ship's top or side view. For this purpose, a novel optimal time window determination (OTWD) approach based on the imaging projection plane (IPP) selection is proposed in this article. First, the proposed OTWD approach determines the view of ship target in the ISAR image via the IPP selection. Then, the Doppler frequency is estimated via the time-frequency distribution (TFD) calculation for the azimuth signal of one scatterer. For the case of one range bin with multiple scatterers, a novel TFD extraction approach based on the clustering analysis is proposed. Afterward, the Doppler frequency is analyzed with sharpness to determine the optimal imaging time window, which can ensure the high image quality and optimal azimuth resolution. The proposed OTWD method is verified as accurate and effective with the experiments on simulated and real measured data.
8 November 2022 in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
Optimal time selection for inverse synthetic aperture radar imaging of ship target is significant for the determination of image project plane, and the performance of it is dependent on the accuracy of ship centerline extraction. In this article, a novel optimal time selection method based on the random sample consensus (RANSAC) technique is proposed, which can extract the ship centerline with high accuracy in the case of ship superstructure and low signal to noise ratio. First, a necessary distance threshold is determined for the RANSAC algorithm combined with the ship body width estimation. Then, a novel cost function is proposed according to the amplitude characteristic of radar image, which can alleviate the influence of randomness. Finally, the robustness of the optimal time selection method is demonstrated by the results of simulated and real measured data.
21 March 2022 in IEEE Transactions on Geoscience and Remote Sensing
For the target with 3-D rotation, the 3-D synthetic aperture radar (SAR) imaging is very important for the feature extraction and classification. To solve this issue, a novel 3-D imaging algorithm through the airborne SAR system with a single antenna is proposed in this article, which has great advantages for the simplification of system structure compared with the traditional interferometric system. The proposed 3-D airborne SAR imaging algorithm can be implemented with three steps: 1) the azimuth signal is modeled as multicomponent linear frequency modulation (LFM) signal due to the relative movement between the target and radar. 2) The scatterer height position can be obtained by estimating the frequency modulation rate (FMR) for the LFM signal. 3) The 3-D airborne SAR image is obtained via the range-Doppler (RD) algorithm. Furthermore, the reconstruction performance under different rotation patterns, including roll, pitch, and yaw, is analyzed. The availability of the presented novel technique is demonstrated by the results of simulated and real experimental data.
11 December 2024 in IEEE Transactions on Geoscience and Remote Sensing
Single-channel synthetic aperture radar (SAR) can be applied to reconstruct the three-dimensional (3-D) structure of maritime targets with the advantages of concise hardware design and lower data rate. Nevertheless, two problems should be solved to enable it, which are 1) two-dimensional (2-D) radar image focusing and 2) scatterer tracking. In this paper, an integral 3-D reconstruction algorithm is proposed for solving these problems. Firstly, the radar image is refocused by using the hybrid SAR and inverse synthetic aperture radar (ISAR) imaging technique. Secondly, a novel brightest scatterers (BSs) extraction method is proposed combined with a clustering algorithm, which is effective and easy to be implemented. Thirdly, a fast and robust scatterer tracking algorithm (STA) is presented to obtain the complete scatterer trajectories, and to effectively enable the factorization method. Moreover, the proposed STA is applicable also in the presence of numerous scatterers and of scatterer scintillation. Afterward, the factorization method is employed to reconstruct the 3-D structure of the ship target. Finally, the effectiveness of the proposed algorithm is shown with the results of simulated and real measured data.
15 June 2022 in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
The airborne hybrid synthetic aperture radar (SAR) and inverse synthetic aperture radar (ISAR) imaging for the ship target is very important in the field of ocean surveillance, but it suffers from the problem of high computational complexity. In this article, an efficient preprocessing approach for the airborne hybrid SAR and ISAR imaging based on the kernel distribution is proposed, which can reduce the computational complexity and preserve the image quality simultaneously. First, the residual Doppler frequency is estimated. Then, a novel measurement method with good robustness is proposed for evaluating the stationarity of Doppler frequency from the aspect of statistics, which adopts the kernel distribution to estimate the probability distribution function curve for the Doppler frequency. Afterward, an effective preprocessing approach is addressed consequently to eliminate the incomplete illumination time and select the time interval with steady target motion. Results of simulated and actual SAR data verify the effectiveness of the novel algorithm proposed in this article.
20 October 2020 in Robotica
SUMMARY: The docking simulators are significant ground test equipment for aerospace projects. The fidelity of docking simulation highly depends on the accuracy performance. This paper investigates the kinematic accuracy for the developed docking simulator. A novel kinematic calibration method which can reduce the number of parameters for error modeling is presented. The principle of parameters separation is studied. A simplified error model is derived based on Taylor series. This method can contribute to the simplification of the error model, fewer measurements, and easier convergence during the parameters identification. The calibration experiment validates this method for further accuracy enhancement.