29 May 2024 in Advanced Science
Organic electrochemical transistors (OECTs) are of great interest in low‐power bioelectronics and neuromorphic computing, as they utilize organic mixed ionic‐electronic conductors (OMIECs) to transduce ionic signals into electrical signals. However, the poor environmental stability of OMIEC materials significantly restricts the practical application of OECTs. Therefore, the non‐fused planar naphthalenediimide (NDI)‐dialkoxybithiazole (2Tz) copolymers are fine‐tuned through varying ethylene glycol (EG) side chain lengths from tri(ethylene glycol) to hexa(ethylene glycol) (namely P‐XO, X = 3–6) to achieve OECTs with high‐stability and low threshold voltage. As a result, the NDI‐2Tz copolymers exhibit ambipolarity, rapid response (<10 ms), and ultra‐high n‐type stability. Notably, the P‐6O copolymers display a threshold voltage as low as 0.27 V. They can operate in n‐type mode in an aqueous solution for over 60 h, maintaining an on‐off ratio of over 105. This work sheds light on the design of exceptional n‐type/ambipolar materials for OECTs. It demonstrates the potential of incorporating these ambipolar polymers into water‐operational integrated circuits for long‐term biosensing systems and energy‐efficient brain‐inspired computing.
5 April 2023 in Materials Horizons
Critical temperature indicators have been extensively utilized in various fields, ranging from healthcare to food safety. However, the majority of the temperature indicators are designed for upper critical temperature monitoring, indicating when the temperature rises and exceeds a predefined limit, whereas stringently demanded low critical temperature indicators are scarcely developed. Herein, we develop a new material and system that monitor temperature decrease, e.g., from ambient temperature to the freezing point, or even to an ultra-low temperature of −20 °C. For this purpose, we create a dynamic membrane which can open and close during temperature cycles from high temperature to low temperature. This membrane consists of a gold-liquid crystal elastomer (Au-LCE) bilayer structure. Unlike the commonly used thermo-responsive LCEs which actuate upon temperature rise, our LCE is cold-responsive. This means that geometric deformations occur when the environmental temperature decreases. Specifically, upon temperature decrease the LCE creates stresses at the gold interface by uniaxial deformation due to expansion along the molecular director and shrinkage perpendicular to it. At a critical stress, optimized to occur at the desired temperature, the brittle Au top layer fractures, which allows contact between the LCE and material on top of the gold layer. Material transport via cracks enables the onset of the visible signal for instance caused by a pH indicator substance. We apply the dynamic Au-LCE membrane for cold-chain applications, indicating the loss of the effectiveness of perishable goods. We anticipate that our newly developed low critical temperature/time indicator will be shortly implemented in supply chains to minimize food and medical product waste.
30 July 2018 in RSC Advances
TiO2/InVO4 nanofibers have been designed and fabricated successfully by one-pot electrospinning process, which display longer carrier lifetime (22 ns) and enhanced visible-light photocatalytic activity.
3 August 2019 in Journal of Materials Science
16 May 2019 in Journal of Materials Science
12 March 2024 in Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment