5 April 2025 in Annals of Biomedical Engineering
Purpose: Cycling is a leading cause of youth sports-related head injury in the U.S. Although youth bicycle helmets sold in the U.S. comply with safety standards limiting head linear acceleration, there needs to be more information on relative differences in protection between helmets that pass. Additionally, studies have yet to look at quantifying youth bicycle helmet performance with respect to their design. Methods: Twenty-one youth bicycle helmet models were subjected to oblique impacts at three locations and two impact speeds where peak linear acceleration (PLA) and peak rotational acceleration (PRA) were quantified. Design features were characterized, including expanded polystyrene (EPS) thickness and presence of shell protrusions. A linear mixed model was used to quantify the effects of design features on PLA and PRA. Results: The youth bicycle helmet models evaluated produced wide ranges in kinematics across all configurations. PLA averaged 95.9 ± 26.1 g at 3.1 m/s and 170.1 ± 43.5 g at 5.2 m/s, while PRA averaged 3150 ± 1275 rad/s2 at 3.1 m/s and 4990 ± 1977 rad/s2 at 5.2 m/s. Impact location, impact speed, and EPS thickness had strong effects on PLA and PRA, whereas shell protrusions only had strong effects on PLA. Conclusion: Youth bicycle helmets with thicker EPS, thinner shells, and shell protrusions at impact locations improved the linear and rotational kinematic measures. Limitations include the small sample size and the impacts analyzed not representing all possible real-world scenarios.
28 April 2025 in Annals of Biomedical Engineering
Purpose: The current equestrian helmet standards set minimal requirements for passing helmets, highlighting the need for a rating system that differentiates helmets based on their impact performance. This study’s objectives were to compare equestrian helmet impact response kinematics between linear-driven and oblique impact conditions and then to evaluate the effect of incorporating oblique drop tests into a previously established equestrian helmet rating system, Equestrian STAR. Methods: Oblique drop tests were conducted with 45 equestrian helmet models at two impact locations, front boss and rear boss, at an impact velocity of 6.56 m/s. The resulting peak linear and rotational head accelerations were compared to those measured during linear-driven pendulum impacts on the same helmet models. A total of 720 impact tests were performed, making this the largest published study on equestrian helmets to date. Equestrian STAR was modified to include both pendulum and oblique impacts by computing and summing weighted concussion risks for each test condition. Results: Oblique impacts had peak linear accelerations ranging from 105.8 to 204.5 g and peak rotational accelerations ranging from 3304 to 13854 rad/s2. Between the linear-driven and oblique impacts, peak linear acceleration was weakly correlated (R 2 = 0.34, p < 0.001), while peak rotational acceleration was not correlated (R 2 = 0.04, p = 0.21). Equestrian STAR scores calculated using both pendulum and oblique impacts suggested that the worst-performing helmet on both systems had nearly four times the concussion risk as the best-performing. Conclusion: Pendulum and oblique impacts have different methods of generating head rotation, which can highlight different modes of helmet performance. The updated Equestrian STAR helmet rating system differentiates between high-performing and low-performing helmets, enabling equestrians to purchase helmets best at reducing concussion risk and providing companies with a process to compare their helmet designs.