Prognostic of the proton-exchange membrane fuel cell can effectively extend the fuel cell lifespan, which can contribute to its large-scale commercialization. In this article, a hybrid prognostic approach is proposed to predict the fuel cell output voltage and other aging parameters that can reflect the stack’s internal degradation. During the training stage, the prognostic parameters are obtained by using the extended Kalman filter (EKF). Besides, the fuel cell output voltage is used to train the long short-term memory (LSTM) recurrent neural network. During the prediction stage, the hybrid EKF and LSTM method will predict the output voltage and aging parameters, and the degradation can be predicted under dynamic conditions. The proposed method is validated by experimental tests under static, quasi-dynamic, and dynamic conditions. Results indicate that the hybrid method can accurately predict the degradation trend of fuel cell voltage and aging parameters. The RMSE of the method is less than 0.0110, 0.0262, and 0.0317 under static, quasi-dynamic, and dynamic conditions, respectively, which are smaller than the conventional model-based methods or data-driven methods. Furthermore, the hybrid method can provide more detailed information for prognostic decision-making and better prolong the fuel cell lifespan.
1 August 2022 in IEEE Transactions on Transportation Electrification
Unmanned aerial vehicles (UAVs) can be regarded as one of the most emerging technologies. Compared with piloted aerial vehicles, UAVs qualify for higher safety and lower cost, and they are more suitable for dangerous missions. Recently, fuel cell (FC) UAVs have obtained more and more attention due to their relatively higher energy density. However, their propulsion system still needs to be further improved to meet different requirements of performing difficult tasks. This article aims to give a comprehensive review of the key technologies of FC UAVs. First, various architectures of the propulsion system and corresponding advantages and disadvantages are introduced. Then, three kinds of management strategies for FC UAVs are reviewed. Next, some special applications and considered design procedures are summarized. Compared with other review articles, this article tries to cover more aspects of FC UAVs. Since these aspects have a tight relationship with each other, giving a comprehensive review can be more beneficial to us to understand the state-of-the-art development of propulsion systems for FC UAVs. The conclusions show that advanced propulsion architectures, efficient online energy management strategies, and professional design procedures are still in urgent demand in the commercial process of FC UAVs.
24 November 2020 in IEEE Transactions on Industry Applications
As the global environmental pollution and energy crisis become more serious, lithium-ion batteries (LIB) received an increasing research interest due to their low self-discharge rates, long cycle life and high power-density for the transportation applications. Battery management system (BMS) play an essential part for the LIB system, can guarantee an efficient and stable operation through LIB state of charge (SOC) estimation. In this paper, a nonlinear observer with terminal voltage feedback injection (VFNO) is designed based on electrochemical single particle (SP) model to monitor the SOC of LIB. The convergence of the SP-VFNO system in consideration of measurement error is proved in terms of Lyapunov stability theory. The current, the terminal voltage and the SOC reference value are measured in battery testing system. Besides, the extended Kalman filter (EKF) based on both the SP model and the second-order resistor-capacitor (SORC) model to estimate SOC are adopted for comparison. The experimental results indicate that the proposed SP-VFNO method has superiority with a faster convergence rate and a higher estimation precision, which can help the accurate SOC estimation for BMS in practical application.
9 March 2020 in IEEE Transactions on Industry Applications
The power semiconductor device is one of the most fragile components of the DC-DC power converters in industrial applications. In this paper, a Luenberger observer-based switch fault diagnosis method is proposed for the DC-DC interleaved boost converter (IBC) for fuel cell (FC) application. The diagnosis variable is the inductor current, which is within the main control system, without needing extra sensors. An adaptive threshold is used to avoid the effects of the converter modeling imperfection, and the wide converter operation range due to FC nonlinear volt-ampere characteristic. The proposed fast diagnosis method is robust to the converter parameter uncertainty and external disturbance. The simulation and experiment results validate the effectiveness and robustness of the proposed diagnosis method.
17 February 2020 in IEEE Transactions on Power Electronics