The interaction between gas flow and liquid flow, governed by fluid dynamic principles, is of substantial importance in both fundamental science and practical applications. For instance, a precisely designed gas shearing on liquid solution may lead to efficacious production of advanced nanomaterials. Here, we devised a needleless Kármán vortex solution blow spinning system that uses a roll-to-roll nylon thread to deliver spinning solution, coupled with vertically blowing airflow to draw high-quality nanofibers with large throughput. A wide variety of nanofibers including polymers, carbon, ceramics, and composites with tunable diameters were fabricated at ultrahigh rates. The system can be further upgraded from single thread to multiple parallel threads and to the meshes, boosting the production of nanofibers to kilogram scale without compromising their quality.
New-generation human body motion sensors for wearable electronics and intelligent medicine are required to comply with stringent requirements in terms of ultralight weight, flexibility, stability, biocompatibility, and extreme precision. However, conventional sensors are hard to fulfill all these criteria due to their rigid structure, high-density sensing materials used as the constituents, as well as hermetical and compact assembly strategy. Here, we report an ultralight sensing material based on radial anisotropic porous silver fiber (RAPSF), which has been manufactured by phase separation and temperature-controlled grain growth strategy on a modified blow-spinning system. The resistance of RAPSF could be dynamically adjusted depending on the deflected shape. Furthermore, an all-fiber motion sensor (AFMS) with an ultra-low density of 68.70 mg cm−3and an overall weigh of 7.95 mg was fabricated via layer-by-layer assembly. The sensor exhibited outstanding flexibility, breathability, biocompatibility, and remarkable body motion recognition ability. Moreover, the AFMS was shown to have great potential as an artificial intelligence throat sensor for throat state identification at the accuracy above 85%, allowing one to spot the early onset of the viral throat illness.
Ultrafine droplets play an important role in materials processing and nanotechnology, with crucial applications in nanoparticle preparation, molecular spraying, water evaporation, nanodrug delivery, nano-printing/coating, among numerous others. While the potential of turbulent gas flow to enhance liquid breakup is acknowledged, the construction of turbulence-driven atomizers for generating ultrafine droplets remains a significant challenge. Herein, we report the innovation of grid-turbulence atomization (GTA), which employed a rotating mesh to deliver liquid and an air knife to spray ultrafine droplets. The airflow across the mesh transitions from laminar to grid-turbulence, leading to complete liquid breakup with three-stages: bag formation, stretching, and turbulence-induced breakup. Ultrafine water droplets with a 4.8 µm Sauter mean diameter have been achieved through GTA. The GTA system demonstrates versatility in atomizing various liquids including those with high viscosities of ~ 1000 cP. We further achieved high-quality production of ultrafine powders including milk, coffee, sugar, polymers, and ceramics, based on the combination of GTA and spray-drying. Our strategic methodology establishes pivotal link between turbulence characteristics and materials processing, influencing a wide range of applications and sparking further innovation in the field.