23 February 2021 in Nondestructive Testing and Evaluation
The mobility of an Unmanned Aerial Vehicle (UAV) offers significant benefits when deploying remote Non-Destructive Testing (NDT) inspections of large-scale assets. Ultrasonic inspection is primarily a contact-based NDT method, that grants the opportunity to remotely monitor the structural health of an industrial asset with enhanced internal integrity information. Presented in this paper is an implementation of an autonomous UAV system, equipped with an ultrasonic thickness measurement payload. This system is designed to conduct ultrasonic inspections of non-magnetic facilities and industrial infrastructure where surface adhesion cannot be achieved magnetically. Operating within a laboratory environment, this system autonomously positioned the transducer on a vertically mounted, unpainted, aluminium sample and completed an ultrasonic thickness measurement without manual intervention. An onboard laser scanner provided instantaneous UAV alignment and standoff error measurements versus the sample’s surface normal vector. While inspecting a region of the aluminium sample with 12.92 mm nominal thickness, the UAV system demonstrated a measurement error of 0.03 mm. During this process, the standard deviation of the craft’s positional error was recorded to be below 63.26 mm, accompanied by an angular alignment error versus the surface normal vector of below 2.71°. The accuracy of the UAV deployed inspection, including thickness measurement accuracy and positional accuracy, depends on many factors. As such, transducer alignment constraints, electrical noise and UAV stability are investigated and discussed. Findings from this paper may be taken to inform future research regarding autonomous airborne ultrasonic inspection of constructed infrastructure and industrial facilities.
26 September 2009 in IEEE Sensors Journal
In this paper, a wireless, multisensor inspection system for nondestructive evaluation (NDE) of materials is described. The sensor configuration enables two inspection modes-magnetic (flux leakage and eddy current) and noncontact ultrasound. Each is designed to function in a complementary manner, maximizing the potential for detection of both surface and internal defects. Particular emphasis is placed on the generic architecture of a novel, intelligent sensor platform, and its positioning on the structure under test. The sensor units are capable of wireless communication with a remote host computer, which controls manipulation and data interpretation. Results are presented in the form of automatic scans with different NDE sensors in a series of experiments on thin plate structures. To highlight the advantage of utilizing multiple inspection modalities, data fusion approaches are employed to combine data collected by complementary sensor systems. Fusion of data is shown to demonstrate the potential for improved inspection reliability.