24 June 2020 in Physical Review A
One of the most intriguing topological features of open systems is that they exhibit exceptional point (EP) singularities. Apart from the widely explored second-order EPs (EP2s), the exploration of higher-order EPs in any system requires more complex topology, which is still a challenge. Here, we encounter a third-order EP (EP3) with the simultaneous presence of multiple second-order EPs in a simple fabrication feasible gain-loss assisted trilayer optical microcavity. Using the scattering-matrix formalism, we study the simultaneous interactions between three successive coupled states via avoided-resonance-crossing (ARC) phenomena, and we identify two EP2s near two ARC regimes. Such an occurrence of two EP2s inside a closed two-dimensional parametric space associated with an unbalanced gain-loss profile leads to the functionality of a cube-root branch point, i.e., an EP3. Following an adiabatic variation of two control parameters around the embedded EP3 in the presence of two identified EP2s, we present a robust successive-state-conversion mechanism among three coupled states. The proposed scheme indeed opens up a unique platform to manipulate light in integrated photonic devices.
25 January 2019 in Journal of Optics
Exploiting scattering matrix ( S -matrix) formalism, a unique route for manipulating the exceptional points (EPs) has been reported in a trilayer open optical microcavity with non-uniform real refractive index. The boundaries of the intermediate index layer are appropriately tapered. The cavity is partially pumped by a transverse distribution of a balanced gain-loss profile. With the strict restriction of balanced gain-loss, controlling infinitesimally small variation of gain-coefficient with simultaneous tapering parameter an EP has been encountered; which is being encircled in cavity parameter space to study dynamics of the coupled states around the EP in the context of robust selective flip-of-state phenomena with lower-asymmetry in state conversion efficiencies. Such a specialty trilayer microcavity with tunable width is reported for the first time; which turns out to be a specific approach to achieve maximum efficiency in conversion with minimum asymmetry. Considering suitable state-of-the-art techniques, this exclusive proposal may open up a fabrication feasible platform for device level implementation of system control exploiting EPs.
12 February 2025 in Physica Scripta
Multi-junction tandem solar cells hold great potential as advanced photovoltaic devices for achieving superior solar energy conversion efficiency. In this study, we leverage device simulation techniques to thoroughly investigate the performance of a lead-free all-inorganic perovskite tandem solar cell. Our proposed device incorporates a two-dimensional perovskite absorber in the top cell (ITO/WS2/Cs3Bi2I9/Cu2O) and a three-dimensional perovskite absorber in the bottom cell (ITO/WS2/RbGeI3/Cu2O/Au). This design strategy is meticulously tailored to ensure optimal light absorption across the visible solar spectrum. By utilizing a standard AM 1.5G spectrum and a filtered spectrum for the top and bottom cells, respectively, coupled with thickness optimization to achieve current matching conditions, we propose a champion tandem structure. Notably, the champion tandem cell, featuring top and bottom cell thicknesses of 900 nm and 263 nm, respectively, exhibits improved performance metrics: a power conversion efficiency of 28.15%, a fill factor of 88.67%, a short-circuit current density of 14.30 mA cm−2, and an open-circuit voltage of 2.22 V. The obtained results indicate a significant advancement in enhancing the efficiency of eco-friendly perovskite solar cells.
9 May 2022 in Optics Letters
The engineering of exceptional points (EPs) in open optical systems has lately attracted much attention for developing future all-optical devices. However, investigation of the fascinating features of EPs in fiber geometries is lacking. We design a fabrication feasible dual-core optical fiber segment, where non-Hermiticity in terms of a symmetric customized gain–loss profile is introduced to modulate the interaction between two corresponding coupled modes toward hosting a dynamical EP encirclement scheme in the gain–loss parameter space. An asymmetric conversion process between two supported modes is reported by exploiting the chirality of the encountered EP. The proposed scheme can lead to an advanced platform to design mode-manipulative all-optical components in communication and all-fiber photonic devices.
17 February 2025 in IEEE Sensors Journal
In this paper, the pH value of various electrolytic solutions is determined using silicon L-shaped Tunnel Field Effect Transistor (TFET), which operates on carrier in-line tunnelling, by dint of a simple detection technique. This scheme relies on the removal of the gate metal of L shaped device by the electrolytic solution. The pH of the solution influences the sub-threshold characteristics of the device due to variations in charge density. The transfer characteristics of the device are obtained using a well-calibrated TCAD tool. Our device structure is optimized by the proper choice of the source height and thickness of the channel for optimum performance. Initially, the device shows an average voltage sensitivity of 63 mV/pH at 300K with HfO2 as gate oxide material over the entire pH range, exceeding Nernst limit of 59 mV/pH. The design of the proposed sensing device has been modified with several high-K gate oxides, and the impacts on sensitivity are explored and analysed. The reliability of the proposed sensor is tested using temperature variation. Finally, the optimized value of 89.35mV/pH at 500K is compared to a Ge-source L-TFET, and the findings show that the proposed silicon-based TFET sensor has a significantly superior sensitivity for sensing a wide range of pH values of electrolytic solutions cost-effectively at high temperatures also.
3 May 2024 in IEEE Transactions on Electron Devices
All-inorganic 2-D Ruddlesden-Popper (RP) layered halide perovskite absorbers will be the real game changer for perovskite solar cells (PSCs) in the near future. In this work, we report an analytical model for all-inorganic 2-D RP layered mixed halide perovskite-based solar cells with Cs2PbI2Cl2 and Cs2SnI2Cl2 as absorbers. As these perovskites manifest layer-dependent properties, we investigate the variation of performance for monolayer, bilayer, and trilayer of the said layered perovskites. In addition, we explore the photovoltaic performance with these absorbers having two different architectures, namely, p-i-n and n-i-p. The power conversion efficiency (PCE) values are found to be significantly higher in the case of the n-i-p architecture for all the absorbers. The obtained PCEs are as high as 24.37% for bilayer Cs2PbI2Cl2 and 23.45% for trilayer Cs2SnI2Cl2 for n-i-p architecture. Moreover, we obtain the highest PCE of 24.58% at 500-nm thickness of bilayer Cs2PbI2Cl2 and 23.61% at 475-nm thickness of trilayer Cs2SnI2Cl2 for the n-i-p architecture.