1 January 2020 in Signal Processing
1 October 2019 in IEEE Sensors Journal
Utilizing the bistatic range (BR) and bistatic range rate (BRR) obtained from time delay difference and Doppler shift difference, a moving target can be localized with the passive multistatic radar (PMR) network. This paper presents a two-stage closed-form method for target localization in PMR. Different from the conventional two-stage weighted least squares (TSWLS) methods, the proposed method employs the weighted spherical-interpolation method to obtain an initial estimate in the first stage and reduces the error in the initial estimate with the deviation refinement in the second stage. Theoretical analysis through mean-square error (MSE) shows the proposed method approaches the Cram’r-Rao lower bound (CRLB) accuracy under the assumption of mild measurement noises. Simulation results validate the analytical results. The proposed method is also shown to achieve the accuracy improvement in target velocity estimate at relatively higher noise levels.
1 January 2021 in Expert Systems with Applications
25 July 2022 in Digital Signal Processing
1 September 2021 in Digital Signal Processing
31 December 2020 in IEEE Sensors Letters
This letter addresses the problem of target localization based on the time-delay (TD) measurements in a wireless sensor network (WSN) with a noncooperative illuminator of opportunity (IO), without assuming the prior knowledge of measurement noise covariance (MNC). The joint likelihood of target position and noise variances are built, based on which the target position and MNC can naturally be estimated by maximizing the joint likelihood. However, the resulting maximum likelihood (ML) problem is intractable due to its nonconvexity and nonlinearity. In order to overcome such difficulty, an alternately iterative optimization strategy is proposed in our approach. The approximate weighted least-squares solution and closed-form shrinkage estimator are introduced into the alternative estimation steps for the target location and MNC, respectively. In simulation experiments with 40 TD measurements, the performance of the proposed method, performing without knowledge of MNC, achieves about 8 dB average improvement over the traditional method without the MNC. Its performance is also close to that of the algorithms and Cramér-Rao lower bound (CRLB) working with known MNC, thus verifying the effectiveness of proposed approach.