The focus of this study is development of an intelligent fault detection, diagnosis and health evaluation system for real industrial robots. The system uses principal component analysis based statistical process control with Nelson rules for online fault detection. Several suitable Nelson rules are chosen for sensitive detection. When a variation is detected, the system performs a diagnostic operation to acquire features of the time domain and the frequency domain from the motor encoder, motor current sensor and external accelerometer for fault diagnosis with a multi-class support vector machine. Additionally, a fuzzy logic based robot health index generator is proposed for evaluating the health of the robot, and the generator is an original design to reflect the health status of the robot. Finally, several real aging-related faults are implemented on a six-axis industrial robot, DRV90L7A6213N by Delta Electronics, and the proposed system is validated effectively by the experimental results.
1 October 2022 in International Journal of Humanoid Robotics
Many recent approaches have successfully generated a stable walking pattern for biped robots, but discussions about its optimization are relatively few. In this paper, a Center of Gravity (COG) trajectory optimization method is proposed to minimize the cost function of joint torque, joint limit, and joint speed limit. The linear quadratic control-based inverted pendulum controller optimizes the COG trajectories in sagittal and lateral directions with the COG height trajectory. The COG height trajectory is optimized by finding the derivative of the cost function with respect to the COG height offline. Then the proposed walking pattern generator builds the COG height trajectory database of different walking steps for online connection of a walking pattern. The walking pattern generator is verified by experiments and simulations of different step cycles with our humanoid robot, NINO, and it can clearly reduce the required joint torque of the robot while walking. In addition, compared with the fixed COG height trajectory, the energy consumption is reduced by 14% from the experimental results. Thus, the method succeeds in generating a more energy-saving walking pattern.
In this paper, a proposed momentum control framework adopts the quadratic programming method to handle the multi-task prioritized problem by assigning suitable constraints and the objective function, including desired end-effectors motions, the limitations of joints and the rate of change of linear and angular momentum of a robot. First, the centroidal momentum matrix is used to derive the relationship between the linear and angular momentum of the center of mass and the whole-body motion of the robot. Second, the linear quadratic state incremental walking pattern generator is used to regulate the rate of change of linear momentum of the robot for balanced walking. Then, according to the difference between the centroidal moment pivot and the zero moment point (ZMP), the compensatory rate of change of horizontal angular momentum can be calculated to keep the balance from unexpected larger disturbances. Finally, the performance of this control framework is verified effectively through the simulations and the experiments. In addition, the ZMP tracking performance is improved up to 50% in the simulations and 14% in the experiments. GRAPHICAL ABSTRACT