26 June 2019 in IEEE Signal Processing Magazine
Ground-penetrating radar (GPR) is a common technique for evaluating the structure and quality of civil engineering materials. The ever-increasing demand for higher GPR time resolution and better interpretation of GPR data has motivated the use of advanced signal processing methods for GPR applications. In this article, we review the major advances in signal processing techniques employed in civil engineering for different tasks, such as estimation of thickness, permittivity, and roughness. Their performance is tested and compared through numerical testing and using experimental data from laboratory measurements.
29 September 2016 in IEEE Communications Letters
In this letter, we propose a new efficient method to estimate the direction-of-arrival (DOA) and range of near-field sources in a decoupled way. First, a non-Hermitian cumulant matrix is constructed, whose eigenvectors associated with zero eigenvalues are used to directly estimate the DOA by using the MUSIC algorithm. Then, the ranges are estimated with the estimated DOA by orthogonalizing the remained eigenvectors. Compared with other modified 2-D MUSIC, the proposed algorithm can greatly reduce the computational complexity by avoiding a 2-D search with only one matrix and one eigenvalue decomposition. Simulation results show the effectiveness of the proposed method.
4 January 2018 in IEEE Transactions on Geoscience and Remote Sensing
Ground-penetrating radars (GPR) are widely used in media parameters' estimation and targets' localization. This paper focuses on time-delay estimation (TDE) using the GPR signal, which contains important information about the probed media structure. However, TDE tends to be a challenging task in GPR applications, in the scenarios of overlapping, coherent signals and limited snapshots. Forward-backward linear prediction (FBLP) is a high time-resolution method, which is able to directly deal with coherent signals. Support vector regression (SVR) is robust with small samples. Therefore, we propose to combine the theory of FBLP and SVR together to enhance the robustness of TDE in the case of coherent, overlapping signals as well as limited snapshots. The proposed method is tested with both numerical and experimental data. Both the results demonstrate the effectiveness of the proposed method.
20 June 2022 in IEEE Transactions on Vehicular Technology
The coprime array has become an essential part of array signal processing, which can obtain a much higher degrees of freedom (DOFs) and larger aperture than that of the conventional approaches. However, this technique is applied in the ideal condition with white Gaussian noise. In this paper, we propose to extend the coprime array to the practical communication scenario by taking impulsive noise and non-circular signals into account. An augmented phased fractional low-order moment (A-PFLOM) is proposed to suppress impulsive noise, and then reduced-dimension MUSIC (RD-MUSIC) subspace techniques are applied for direction of arrival (DOA) information of non-circular sources. Compared to the existing methods, the proposed method has better estimation performance in a wide range of impulsive noise environments.
24 October 2018 in IEEE Geoscience and Remote Sensing Letters
In the field of civil engineering, ground penetrating radar (GPR) is a highly efficient nondestructive testing tool for sustainable management of pavement infrastructures. GPR allows to evaluate the structure of the roadway over large distances (with contactless configurations) and to detect significant subsurface defects. This letter presents a new method to detect thin debondings within pavement structures with the step-frequency GPR. The proposed method enables us to carry out the detection with only a small number of frequency samples and A-scans. It is based on the linear prediction and support vector regression theories. Two experimental results show its effectiveness.
2 October 2019 in IEEE Transactions on Vehicular Technology
This paper presents a modified orthogonal propagator method (OPM) with spline interpolation for direction of arrival (DoA) estimation. The conventional OPM is based on the noise-free signal model. When noise exists, the main contribution of noise (additive temporally and spatially white Gaussian noise) is in the diagonal elements of the data covariance matrix. Therefore, the influence of noise can be minimized by restoring the noise free diagonal elements through an interpolation procedure and the propagator can then be directly extracted from the denoised data covariance matrix, which is the main idea of the proposed method in this paper. The performance of the proposed modified OPM is tested through numerical simulations. Simulation results show that the proposed modified OPM achieves low root-mean square errors (RMSEs) with small computational load in DoA estimation.