1 February 2008 in The 9th International Conference on Advanced Communication Technology
This paper presents modulation classification method capable of classifying incident digital signals without a priori information using WT key features and SVM. These key features for modulation classification should have good properties of sensitive with modulation types and insensitive with SNR variation. In this paper, the 4 key features using WT coefficients, which have the property of insensitive to the changing of noise, are selected. The numerical simulations using these features are performed. We investigate the performance of the SVM-DDAG classifier for classifying 8 digitally modulated signals using only 4 WT key features (i.e., 4 level scale), and compare with that of decision tree classifier to adapt the modulation classification module in software radio. Results indicated an overall success rate of 95% at the SNR of 10dB in SVM-DDAG classifier on an AWGN channel.
30 January 2006 in Nanotechnology
A simple, one-step method is developed to fabricate various nanostructures such as nanoholes and nanolines based on the detachment of an organic polymer film in contact with a patterned polyurethane acrylate mould under a low physical pressure (1-2 bar) at ambient conditions. Calculation of the work of adhesion based on contact angle measurements indicates that the adhesion strength at the organic/mould interface is greater than that at the organic/substrate interface, resulting in a successful detachment without any surface modifications. 4,4(')-bis[N-1-napthyl-N-phenyl-amino]biphenyl (NPB) is used as the organic film owing to its low cohesion energy and stability in air. Nanoholes as small as 150 nm and nanolines as small as 50 nm have been fabricated using this approach. These nanostructures are used as a template for selective deposition of silver nanoparticles and a wet/dry etch resist for further pattern transfer.
31 January 2023 in The Journal of Korean Institute of Electromagnetic Engineering and Science
한국전자파학회논문지 (The Journal of Korean Institute of Electromagnetic Engineering and Science)
31 December 2024 in The Journal of Korean Institute of Information Technology
다기능 레이다는 동시에 다수의 표적을 탐색, 추적하는 임무를 수행하여 한정된 시간 자원 내 탐색 소요시간을 최적화하기 위해 송신 광역빔 사용이 필수적이다. 본 논문에서는 2,304개 소자의 능동배열레이다에서 중심소자부터 외각소자까지 선형적인 위상변화 분포를 적용하여 송신 광역빔을 구현하였다. 배열소자의 위상값은 3개의 변수가 적용된 소자 위치별 위상 계산 수식을 통해 최적값을 도출하였다. 설계 결과를 확인하기 위해 능동배열레이다를 제작하고, 제안된 위상분포를 적용하여 근접전계 시험을 통해 송신 광역빔 특성을 확인하였다. 시험 결과 주빔 영역에서 리플로 인한 빔패턴의 왜곡이 없으며, 펜슬빔대비 광역빔에서 약 2배의 빔폭을 확인하였다.
30 September 2024 in The Journal of Korean Institute of Electromagnetic Engineering and Science
한국전자파학회논문지 (The Journal of Korean Institute of Electromagnetic Engineering and Science)