Electrical and optical properties of poly(dioctylfluorene-alt-benzothiadiazole) based inverted organic light-emitting diodes (iOLEDs) with electrochemically deposited ZnO electron-injecting layer (EIL) have been studied. The device characteristics of the iOLEDs fabricated in this work (8600 cd/m2, 1.5 cd/A at 6.0 V) are almost comparable to those of conventional iOLEDs with sputtered ZnO EIL, indicating that the electron injection properties of electrodeposited ZnO EIL are similar to those of sputtered ZnO EIL. Impedance spectroscopy reveals that the equivalent circuits of iOLEDs with electrochemically deposited ZnO EIL and with sputtered ZnO EIL are indistinguishable.
The performance of organic light-emitting diodes (OLEDs) and their interfacial charge density have been studied in tris-(8-hydroxyquinolate) aluminum (Alq 3 )-based OLEDs with four different hole transport layers (HTLs). The four HTLs have almost identical highest occupied molecular orbital (HOMO) energy levels. The performance of the four OLEDs is not greatly changed. The interfacial charge density is determined from the hole injection voltage in the capacitance—voltage characteristics of the OLEDs. Determination of the interfacial charge density is verified by device simulation. The interfacial charge density is dependent on the HTL materials in Alq 3 -based OLEDs, and is proportional to the difference in dipole moments between the HTLs and electron transport layers including Alq 3 .
28 January 2016 in Japanese Journal of Applied Physics
We report on poly(dioctylfluorene-alt-benzothiadiazole) (F8BT) based inverted organic light-emitting diodes (iOLEDs) using commercially available transparent conductive oxide (TCO) films as a cathode, indium tin oxide (ITO), Ga doped ZnO (GZO), and Al doped ZnO (AZO). The ITO, GZO, and AZO glasses work as an electron-injecting layer (EIL) and cathode. The device configuration that we prepared is ITO, GZO, or AZO/F8BT/MoO3/Au. The device characteristics of these iOLEDs are almost comparable to those of conventional iOLEDs with ZnO films prepared by spray pyrolysis as an EIL, indicating that the electron injection properties of ITO, GZO, or AZO as a cathode are similar to those of ZnO layer in conventional iOLEDs. These results demonstrate the low-cost fabrication of iOLEDs utilizing commercially available TCO glasses as a cathode without deposition of ZnO layers on ITO glass.