The solubility of lignin in a mixture of γ‐valerolactone (GVL) and water at different weight ratios was measured using the Hildebrand solubility parameters. Based on the molecular structure of lignin, its solubility parameter (δ‐value) was calculated as 25.5 MPa1/2. The δ‐value for aqueous GVL solvent increased from 23.1 MPa1/2 for pure GVL to 45.6 MPa1/2 for pure water. Therefore, the lignin solubility was predicted to increase with increasing GVL concentration in the aqueous mixture up to approximately 92–96 wt % of GVL. A ternary diagram describing the phase behavior of water–GVL–lignin mixtures at room temperature was constructed based on the experimental results. The three‐component system exhibited a complex behavior with a liquid–liquid and solid–liquid–liquid phase split. The efficiency of the selected fractionation trials in a previous work was validated using the ternary solubility diagram. A promising recovery pathway and lignin isolation method were deduced from the results of this work.
6 November 2019 in International Journal of Thermophysics
One major sustainable development goal is to produce chemicals and fuels from renewable resources, such as biomass, rather than from fossil fuels. A key part of this development is data on the properties of chemicals that appear in this bio-based supply chain. Many of the chemicals have yet to be studied thoroughly, and data on their properties is lacking. Here, we present new experimental data on the properties of 11 bio-compounds, along with PC-SAFT parameters for modeling their properties. The measured data includes vapor pressures, compressed densities, and refractive indexes. The 11 bio-compounds are tetrahydrofuran, 2-pentanone, furfural, 2-methoxy-4-methylphenol, 2-methylfuran, dihydrolevoglucosenone, cyclopentyl methyl ether, 2-sec-butylphenol, levoglucosenone, γ-valerolactone, and 2,6-dimethoxyphenol.
18 October 2018 in Industrial & Engineering Chemistry Research
We introduce the optimization of the pulping conditions and propose different chemical recovery options for a proven biorefinery concept based on γ-valerolactone (GVL)/water fractionation. The pulping process has been optimized whereby the liquor-to-wood ratio (L:W) could be reduced to 3 L/kg without compromising the pulp properties as raw material for textile fibers production. The recovery of the pulping solvent was performed through combinations of lignin precipitation by water addition, distillation at reduced pressure and liquid CO2 extraction. With a two-step lignin precipitation coupled with vacuum distillation, more than 90% of lignin and GVL could be recovered from the spent liquor. However, a significant part of GVL remained unrecoverable in the residue, a highly viscous liquid with complicated phase behavior. The recovery by lignin precipitation combined with liquid CO2 extraction could recover more than 85% GVL and 90% lignin without forming any problematic residue as in the distillation process. The remaining GVL stayed in the raffinate containing a low amount of lignin and other compounds, which can be further processed to isolate the GVL and improve the recovery rate.
26 January 2016 in Journal of Chemical & Engineering Data
In this study, we propose a full gamma-valerolactone (GVL) organosolv biorefinery concept including the utilization of all pulping streams, solvent recovery, and preliminary material and energy balances. GVL is a renewable and non-toxic solvent that fractionates woody biomass. The silver birch chips were pulped (45–65 wt% GVL, 150 °C, 2 h) under a series of acid-catalyzed conditions (5–12 kg H2SO4/t), and the fully bleached pulp was spun into fibers by the IONCELL® process and knitted into the fabric. The dissolved lignin was precipitated by water from spent liquor (1:1) and processed into polyhydroxyurethane. Most of the dissolved hemicelluloses were in the form of xylose, therefore, the crystallization efficiency of xylose from spent liquor in the presence of residual GVL was studied. The GVL recovery rate in the lab column was 66%, however by increasing the number of equilibrium stages, 99% recovery could be achieved.