6 January 2012 in IEEE Transactions on Electron Devices
Magnetic tunnel junctions (MTJs) composed of ferromagnetic layers with perpendicular magnetic anisotropy (PMA) are of great interest for achieving high-density nonvolatile memory and logic chips owing to its scalability potential together with high thermal stability. Recent progress has demonstrated a capacity for high-speed performance and low power consumption through current-induced magnetization switching. In this paper, we present a compact model of the CoFeB/MgO PMA MTJ, a system exhibiting the best tunnel magnetoresistance ratio and switching performance. It integrates the physical models of static, dynamic, and stochastic behaviors; many experimental parameters are directly included to improve the agreement of simulation with experimental measurements. Mixed simulation based on the 65-nm technology node of a magnetic flip-flop validates its relevance and efficiency for MTJ/CMOS memory and logic chip design.
14 April 2015 in IEEE Transactions on Biomedical Circuits and Systems
Spin-transfer torque magnetic memory (STT-MRAM) is currently under intense academic and industrial development, since it features non-volatility, high write and read speed and high endurance. In this work, we show that when used in a non-conventional regime, it can additionally act as a stochastic memristive device, appropriate to implement a “synaptic” function. We introduce basic concepts relating to spin-transfer torque magnetic tunnel junction (STT-MTJ, the STT-MRAM cell) behavior and its possible use to implement learning-capable synapses. Three programming regimes (low, intermediate and high current) are identified and compared. System-level simulations on a task of vehicle counting highlight the potential of the technology for learning systems. Monte Carlo simulations show its robustness to device variations. The simulations also allow comparing system operation when the different programming regimes of STT-MTJs are used. In comparison to the high and low current regimes, the intermediate current regime allows minimization of energy consumption, while retaining a high robustness to device variations. These results open the way for unexplored applications of STT-MTJs in robust, low power, cognitive-type systems.
22 January 2015 in Journal of Physics D: Applied Physics
We investigate the magnetization switching induced by spin-Hall-assisted spin-transfer torque (STT) in a three-terminal device consisting of a perpendicular-anisotropy magnetic tunnel junction (MTJ) and an β -W strip. Magnetization dynamics in free layer of MTJ is simulated by solving numerically a modified Landau–Lifshitz–Gilbert equation. The influences of spin-Hall write current (density, duration and direction) on the STT switching are evaluated. We find that the switching speed of a STT-MTJ can be significantly improved (reduced to <1 ns) by using a sufficiently large spin-Hall write current density (~25 MA cm −2 ) with an appropriate duration (~0.5 ns). Finally we develop an electrical model of three-terminal MTJ/ β -W device with Verilog-A language and perform transient simulation of switching a 4 T/1MTJ/1 β -W memory cell with Spectre simulator. Simulation results demonstrate that spin-Hall-assisted STT-MTJ has advantages over conventional STT-MTJ in write speed and energy.
1 September 2012 in Microelectronics Reliability
8 March 2016 in IEEE Transactions on Electron Devices
LNLirida Alves de Barros Naviner
Lirida Alves de Barros Naviner
+2
Spin-transfer torque magnetic tunnel junction (MTJ) is a promising candidate for nonvolatile memories thanks to its high speed, low power, infinite endurance, and easy integration with CMOS circuits. However, a relatively high current flowing through an MTJ is always required by most of the switching mechanisms, which results in a high electric field in the MTJ and a significant self-heating effect. This may lead to the dielectric breakdown of the ultrathin (~1 nm) oxide barrier in the MTJ and cause functional errors of hybrid CMOS/MTJ circuits. This paper analyzes the physical mechanisms of time-dependent dielectric breakdown (TDDB) in an oxide barrier and proposes an SPICE-compact model of the MTJ. The simulation results show great consistency with the experimental measurements. This model can be used to execute a more realistic design according to the constraints obtained from simulation. The users can estimate the lifetime, the operation voltage margin, and the failure probability caused by TDDB in the MTJ-based circuits.
26 March 2015 in IEEE Transactions on Electron Devices
Recently, spin-transfer torque magnetic random access memory (STT-MRAM) has been considered as a promising universal memory candidate for future memory and computing systems, thanks to its nonvolatility, high speed, low power, good endurance, and scalability. However, as technology scales down, STT-MRAM suffers from serious process variations and thermal fluctuations, which greatly degrade the performance and stability of STT-MRAM. In general, the optimization and robustness of STT-MRAM under process variations often require a hybrid design flow and multilevel codesign strategies. In this paper, we quantitatively analyze the impacts of process variations and thermal fluctuations on the STT-MRAM performances from physics, technology, and circuit design point of views. Based on the analyses, we found that readability is becoming the newest challenge for deeply scaled STT-MRAM due to the conflict between sensing margin and read disturbance. To deal with this problem, a novel reconfigurable design strategy from device, circuit, and architecture codesign perspective is then presented. Finally, a conceptual hybrid magnetic/CMOS design flow is also proposed for STT-MRAM in deeply scaled technology nodes.