20 October 2009 in Angewandte Chemie International Edition
1 January 2009 in Journal of the Electrochemical Society
<mml:math display="inline"><mml:mrow><mml:msub><mml:mrow><mml:mtext>LiMnPO</mml:mtext></mml:mrow><mml:mrow><mml:mn>4</mml:mn></mml:mrow></mml:msub></mml:mrow></mml:math>LiMnPO4 nanoparticles synthesized by the polyol method were examined as a cathode material for advanced Li-ion batteries. The structure, surface morphology, and performance were characterized by X-ray diffraction, high resolution scanning electron microscopy, high resolution transmission electron microscopy, Raman, Fourier transform IR, and photoelectron spectroscopies, and standard electrochemical techniques. A stable reversible capacity up to <mml:math display="inline"><mml:mrow><mml:mn>145</mml:mn><mml:mspace width="0.5em"></mml:mspace><mml:mtext>mAh</mml:mtext><mml:mspace width="0.5em"></mml:mspace><mml:msup><mml:mi mathvariant="normal">g</mml:mi><mml:mrow><mml:mo>−</mml:mo><mml:mn>1</mml:mn></mml:mrow></mml:msup></mml:mrow></mml:math>145mAhg−1 could be measured at discharge potentials <mml:math display="inline"><mml:mrow><mml:mo></mml:mo><mml:mn>4</mml:mn><mml:mspace width="0.5em"></mml:mspace><mml:mi mathvariant="normal">V</mml:mi></mml:mrow></mml:math>4V vs <mml:math display="inline"><mml:mrow><mml:mtext>Li</mml:mtext><mml:mo>/</mml:mo><mml:msup><mml:mrow><mml:mtext>Li</mml:mtext></mml:mrow><mml:mo>+</mml:mo></mml:msup></mml:mrow></mml:math>Li/Li+ , with a reasonable capacity retention during prolonged charge/discharge cycling. The rate capability of the <mml:math display="inline"><mml:mrow><mml:msub><mml:mrow><mml:mtext>LiMnPO</mml:mtext></mml:mrow><mml:mrow><mml:mn>4</mml:mn></mml:mrow></mml:msub></mml:mrow></mml:math>LiMnPO4 electrodes studied herein was higher than that of <mml:math display="inline"><mml:mrow><mml:msub><mml:mrow><mml:mtext>LiNi</mml:mtext></mml:mrow><mml:mrow><mml:mn>0.5</mml:mn></mml:mrow></mml:msub><mml:msub><mml:mrow><mml:mtext>Mn</mml:mtext></mml:mrow><mml:mrow><mml:mn>0.5</mml:mn></mml:mrow></mml:msub><mml:msub><mml:mi mathvariant="normal">O</mml:mi><mml:mrow><mml:mn>2</mml:mn></mml:mrow></mml:msub></mml:mrow></mml:math>LiNi0.5Mn0.5O2 and <mml:math display="inline"><mml:mrow><mml:msub><mml:mrow><mml:mtext>LiNi</mml:mtext></mml:mrow><mml:mrow><mml:mn>0.8</mml:mn></mml:mrow></mml:msub><mml:msub><mml:mrow><mml:mtext>Co</mml:mtext></mml:mrow><mml:mrow><mml:mn>0.15</mml:mn></mml:mrow></mml:msub><mml:msub><mml:mrow><mml:mtext>Al</mml:mtext></mml:mrow><mml:mrow><mml:mn>0.05</mml:mn></mml:mrow></mml:msub><mml:msub><mml:mi mathvariant="normal">O</mml:mi><mml:mrow><mml:mn>2</mml:mn></mml:mrow></mml:msub></mml:mrow></mml:math>LiNi0.8Co0.15Al0.05O2 (NCA) in similar experiments and measurements. The active mass studied herein seems to be the least surface reactive in alkyl <mml:math display="inline"><mml:mrow><mml:mtext>carbonate</mml:mtext><mml:mo>/</mml:mo><mml:msub><mml:mrow><mml:mtext>LiPF</mml:mtext></mml:mrow><mml:mrow><mml:mn>6</mml:mn></mml:mrow></mml:msub></mml:mrow></mml:math>carbonate/LiPF6 solutions. We attribute the low surface activity of this material, compared to the lithiated transition-metal oxides that are examined and used as cathode materials for Li-ion batteries, to the relatively low basicity and nucleophilicity of the oxygen atoms in the olivine compounds. The thermal stability of the <mml:math display="inline"><mml:mrow><mml:msub><mml:mrow><mml:mtext>LiMnPO</mml:mtext></mml:mrow><mml:mrow><mml:mn>4</mml:mn></mml:mrow></mml:msub></mml:mrow></mml:math>LiMnPO4 material in solutions (measured by differential scanning calorimetry) is much higher compared to that of transition-metal oxide cathodes. This is demonstrated herein by a comparison with NCA electrodes.
1 February 2012 in Journal of Power Sources
23 July 2014 in Nano Letters
Understanding the evolution of chemical composition and morphology of battery materials during electrochemical cycling is fundamental to extending battery cycle life and ensuring safety. This is particularly true for the much debated high energy density (high voltage) lithium–manganese rich cathode material of composition Li1 + xM1 – xO2 (M = Mn, Co, Ni). In this study we combine full-field transmission X-ray microscopy (TXM) with X-ray absorption near edge structure (XANES) to spatially resolve changes in chemical phase, oxidation state, and morphology within a high voltage cathode having nominal composition Li1.2Mn0.525Ni0.175Co0.1O2. Nanoscale microscopy with chemical/elemental sensitivity provides direct quantitative visualization of the cathode, and insights into failure. Single-pixel (∼30 nm) TXM XANES revealed changes in Mn chemistry with cycling, possibly to a spinel conformation and likely including some Mn(II), starting at the particle surface and proceeding inward. Morphological analysis of the particles revealed, with high resolution and statistical sampling, that the majority of particles adopted nonspherical shapes after 200 cycles. Multiple-energy tomography showed a more homogeneous association of transition metals in the pristine particle, which segregate significantly with cycling. Depletion of transition metals at the cathode surface occurs after just one cycle, likely driven by electrochemical reactions at the surface.
8 November 2014 in Journal of the Electrochemical Society
Lithium-rich and manganese-rich (LMR) layered transition metal (TM) oxide composites with general formula xLi2MnO3·(1-x)LiMO2 (M = Ni, Co, Mn) are promising cathode candidates for high energy density lithium ion batteries. Lithium-manganese-rich TM oxides crystallize as a nanocomposite layered phase whose structure further evolves with electrochemical cycling. Raman spectroscopy is a powerful tool to monitor the crystal chemistry and correlate phase changes with electrochemical behavior. While several groups have reported Raman spectra of lithium rich TM oxides, the data show considerable variability in terms of both the vibrational features observed and their interpretation. In this study, Raman microscopy is used to investigate lithium-rich and manganese-rich TM cathodes as a function of voltage and electrochemical cycling at various temperatures. No growth of a spinel phase is observed within the cycling conditions. However, analysis of the Raman spectra does indicate the structure of LMR-NMC deviates significantly from an ideal layered phase. The results also highlight the importance of using low laser power and large sample sizes to obtain consistent data sets.
1 March 2013 in Journal of Materials Chemistry A
The electrochemical rate performance and capacity retention of the “layered–layered” lithium rich Li1.2Mn0.525Ni0.175Co0.1O2 (Li-rich NMC) material are significantly improved by a nanometer layer coating of a lithium conducting solid electrolyte, lithium phosphorus oxynitride (LiPON). The LiPON layer is deposited on the Li-rich NMC particles by the RF-magnetron sputtering method. The presence of the LiPON layer provides interfacial stability under high current (rate) and voltage cycling conditions and thereby improves the capacity retention over cycle life compared to pristine or uncoated Li-rich NMC. Specifically, the LiPON coated Li-rich NMC composite electrode showed stable reversible capacities of >275 mAh g−1 when cycled to 4.9 V for more than 300 cycles, and showed at least threefold improvements in the rate performance compared to the uncoated electrode compositions. Increasing the LiPON layer thickness beyond a few nanometers leads to capacity fade due to increasing electronic resistance. Detailed microstructural and electrochemical impedance spectroscopy studies are undertaken to characterize and understand the role of LiPON in improving the interfacial stability and electrochemical activity at the interface.