1 December 2016 in Journal of Structural Engineering
In 1963, a geometry-dependent approach to estimate the coefficient of restitution (COR) was proposed for free rocking structures. Since then, this estimation has been reported as being consistently lower than results obtained from experimental data. An assumption used by the original model is shown to be the cause of this underestimation. Identifying that the rocking takes place over a contact region, this study introduces a modified formulation for free rocking bodies and proposes an improved COR estimation to accurately quantify the energy dissipation of these structures. Using experimental data, it is shown that the improved CORs consistently provide better correlation to those established from tests than the COR obtained from the original approach.
1 September 2017 in Journal of Structural Engineering
Unlike the use of bonded reinforcement to anchor a masonry wall to its foundation, the use of unbonded posttensioning may result in a controlled rocking response of the wall. Considering that conventional analysis techniques routinely employed for monolithic structures are inadequate to describe a controlled rocking response, this paper introduces analysis methods that are able to predict the monotonic force-displacement responses of masonry walls with unbonded posttensioning. These methods include (1) an iterative procedure that employs sectional analysis and accounts for the confinement effects attributable to lateral friction at the wall-to-foundation interface and (2) a simplified procedure that is based on equivalent stress block analysis. The two methods are compared against experimental data from three past research studies, and high-fidelity finite-element models are used to verify predictions of the wall responses, including the neutral axis depth (NAD) at the wall-to-foundation interface. Comparisons show the proposed analysis methods to adequately capture the experimental force-displacement responses and produce NAD variations that agree well with the finite-element models.
1 May 2018 in Earthquake Spectra
Rocking is likely the primary dynamic mode of vibration during the earthquake response of free‐standing structural members. Previous research has routinely described the dynamic behavior of these members using a coefficient of restitution ( r ) modeling approach, which is shown in this paper to be insufficient for accurately capturing their decaying motion characteristics. Utilizing experimental testing and analytical investigation of concrete members, this study concludes that free‐standing members dissipate energy in both a continuous manner and instantaneously at impacts at the rocking interface. Accounting for these two energy dissipation components is necessary to accurately produce rocking dynamic responses of free‐standing blocks.
1 August 2017 in Engineering Structures
5 February 2020 in Earthquake Engineering & Structural Dynamics
30 December 2019 in Earthquake Engineering & Structural Dynamics