Doughnut-like, concave hierarchical structures of orthorhombic Sb2WO6 were firstly prepared and were found to exhibit excellent visible-light-driven photocatalytic performance.
Magneto-ionic control of magnetism is a promising route toward the realization of non-volatile memory and memristive devices. Magneto-ionic oxides are particularly interesting for this purpose, exhibiting magnetic switching coupled to resistive switching, with the latter emerging as a perturbation of the oxygen vacancy concentration. Here, we report on electric-field-induced magnetic switching in a La0.7Sr0.3MnO3 (LSMO) thin film. Correlating magnetic and chemical information via photoemission electron microscopy, we show that applying a positive voltage perpendicular to the film surface of LSMO results in the change in the valence of the Mn ions accompanied by a metal-to-insulator transition and a loss of magnetic ordering. Importantly, we demonstrate that the voltage amplitude provides granular control of the phenomena, enabling fine-tuning of the surface electronic structure. Our study provides valuable insight into the switching capabilities of LSMO that can be utilized in magneto-ionic devices.
We report the thermal annealing-induced formation of ring-like structure of Zn(II)-doped magnetite from iron alkoxide leaf-like nanoplate precusor. The phase, structure and morphology of magnetite nanorings were comprehensively characterized by powder X-ray diffraction, X-ray photoelectron spectroscopy, atomic force microscope, scanning electron microscope, and transmission electron microscope. The obtained Zn(II)-doped magnetite nanorings are of 13–20 nm in edge width, 70–110 nm in short axis length and 100–150 nm in long axis length. The growth mechanism was possibly due to a combined effect of decomposition of the organic component and diffusion growth. Zn(II)-doped magnetite nanorings delivered saturation magnetization of 66.4 emu/g and coercivity of 33 Oe at room temperature. In addition, the coatings containing Zn(II)-doped magnetite nanorings as fillers exhibit excellent microwave absorption properties with a maximum reflection loss of −40.4 dB and wide effective absorbing band obtained in coating with thin thickness of 1.50 mm.