25 November 2021 in Optical Engineering
Silicon dioxide, , is a low-index and low-absorption material, which can be used in combination with high-index oxide films operating in the UV to near IR regions. Typical applications in include high-reflection coatings, antireflection coatings, all-dielectric mirrors, beam-dividers, band-pass filters, and polarizers,1 – 5 especially for optical properties of films, such as refractive index, physical thickness, and optical thickness become the focus. Several different deposition methods have tried to get films, including ion beam sputtering (IBS),6 ion beam-assisted deposition (IAD),7 electron beam evaporation (EB),8 molecular beam epitaxy (MBE),9 radio frequency magnetron sputtering,10 plasma enhanced chemical vapor deposition,11 and reactive pulsed laser deposition.12
1 January 2021 in Journal of Applied Remote Sensing
<!-- *** Custom HTML *** --> Airborne LiDAR has become a kind of indispensable measurement device in the current field of remote sensing. However, target extraction using traditional airborne LiDAR based on single-point scanning requires filtering and point cloud segmentation operations, which are complicated and time consuming. Although some researchers have studied streak tube imaging LiDAR (STIL) before, there are few reports in which it is used as an airborne LiDAR for ground measurement in large-scale field. We propose a method of ground target extraction using STIL. Taking advantage of the structural properties of the STIL, complex filtering and point cloud segmentation algorithms are avoided in the target extraction method. The purpose of this article is to verify the feasibility of airborne STIL in ground target extraction. We analyzed the raw streak signal image collected by field experiment and used morphology and intensity information to extract features. After that, we employed the decision tree classifier to classify the four kinds of targets and evaluated the extraction results. The results show that the target extraction achieved satisfactory consequences under an acceptable level. That demonstrates that ground target extraction using STIL is feasible in the field of large-scale remote sensing.
25 November 2021 in Optical Engineering
The correlation between the process parameters of auxiliary ion source and the SiO2 film stress was systematically studied using dual-ion-sputtering deposition. Spectrophotometer and ellipsometer were used to measure the SiO2 film’s transmittance spectrum and reflection ellipsometry. The refractive index and thickness of SiO2 film were obtained by total spectrum inversion calculation. The laser interferometer measures the substrate surface shape to obtain film stress. The experimental result shows that film stress is related to sputtering energy during deposition, high-energy oxygen ion assisted deposition can significantly reduce it and the assisted ion beam voltage plays an important role in controlling it by data normalization analysis. Ultra-low stress high reflective film was prepared by dual-ion-beam sputtering deposition, where stress was 70% lower than traditional film. At the same time, this film can ensure sufficiently high optical quality to keep it reliable and stable in high-precision laser systems.