5 February 2010 in IEEE Transactions on Microwave Theory and Techniques
A new branch-line coupler structure with port extensions is proposed for the dual-band operation. The conventional branch-line coupler structure is adapted to the dual-band operation by inserting a transmission line section at the input ports and modifying the branch parameters. The dual-band performance of the proposed coupler is verified theoretically through the rigorous microwave circuit analysis and the exact design equations are derived in concise form. The design, simulation, and measurement results validate the dual-band capability of the proposed coupler with the same quadrature phase relation between the two band frequencies.
22 March 2010 in Microwave and Optical Technology Letters
24 June 2008 in IEEE Microwave and Wireless Components Letters
A modified Wilkinson power divider structure is presented for the dual-band operation. The divider has two output ports shifted away from the isolation resistor to the middle of the divider and an open stub at the input port. The dual-band operation can be achieved over a wide range of band-ratios with the open stub advantage.
5 March 2010 in Microwave and Optical Technology Letters
29 January 2013 in IEEE Transactions on Microwave Theory and Techniques
In the above-named article [ibid., vol. 60, no. 7, pp. 2131-2141, Jul. 2012], the authors propose a new analytical methodology for the sensitivity analysis of microwave filter networks. However, an errata has been found which may affect the readers' understanding. The term "reflection poles" has been used instead of the correct term "reflection zeros" three times in the paper. To be precise, the sentence on page 2133 "has two peak values at the frequencies of the reflection poles, which are missing" should be "has two peak values at the frequencies of the reflection zeroes, which are missing." In addition, there are two other occurrences of error on page 2134, where "frequencies where the reflection poles occur" should state "frequencies where the reflection zeros occur."
25 March 2011 in Microwave and Optical Technology Letters