In the modern-day phosphor-converted light emitting diodes (pc-LEDs), white-light for general illumination is generated by combiningblue light from the InGaN chip with the yellow-green emission of Ce doped garnet phosphor and a red emitter. The red emitter is required to induce a “warm-white” color temperature (2700–3500 K). The optical properties of the red emitter are critical to achieving high luminous efficacy (lumens per watt or LPW) and high color rendering index (CRI) of the white light. The red emitter must display both strong absorption at 450 nm and sharp line emission in the range of 610 nm − 650 nm. Currently, the red emitter that satisfies these requirements is the K2SiF6:Mn4+ (PSF/KFS) phosphor. This review summarizes the fundamental aspects of the Mn4+ ion luminescence in solids, the spectroscopic properties of the Mn4+ ion in K2SiF6 and the manufacturing procedures with particular emphasis on post-synthesis processes that are required to produce phosphor with acceptable reliability. The review also discusses alternate compositions, future improvements, and challenges.
The temperature dependence of the Mn4+ photoluminescence and lifetime has been measured in the red emitting K2SiF6:Mn4+ phosphor that is sold under the trade name, TriGain®. In the range 12−450 K, the 2E → 4A2 emission intensity increases considerably while the lifetime decreases. Above 450 K, rapid decrease in the intensity and lifetime is observed. The results are interpreted in terms of dynamically induced increases in the emission intensity and decay rate coupled with an Arrhenius-type thermal quenching. The parameters of our fitting to physical models are compared with those reported on laboratory synthesized K2SiF6:Mn4+ phosphor. This comparative study sheds light on factors responsible for non-radiative relaxation processes, which is fundamental to the understanding of phosphor quantum efficiency and performance. The temperature dependence of the Stokes to anti-Stokes vibronic line intensity ratios is also measured and analyzed. Due to low thermal conductivity of K2SiF6, it was necessary to develop protocols to ensure that the surface temperature of the phosphor was close to that of the cold finger in the closed cycle He cryostat.
Results are reported demonstrating that radio-frequency (rf) plasma cleaning is an effective technique for mitigating microwave-pulse shortening (i.e., lengthening the pulse) in a multimegawatt, large-orbit, coaxial gyrotron. Cleaning plasmas were generated by 50 W of rf power at 13.56 MHz in nitrogen fill gas in the pressure range 15–25 mTorr. Improvements in the averaged microwave energy output of this high-power-microwave device ranged from 15% to 245% for different initial conditions and cleaning protocols. The mechanism for this improvement is believed to be rf plasma sputtering of excess water vapor from the cavity/waveguide and subsequent removal of the contaminant by cryogenic vacuum pumps.