Atmosphere-breathing electric propulsion offers a promising solution for orbit maintenance in very low Earth orbit (VLEO) by collecting and ionizing residual atmospheric particles to generate thrust. The intake-collector (IC) plays a critical role in determining the propulsion system efficiency, yet experimental data on IC performance under relevant flow conditions remain scarce. This work establishes an experimental approach based on an adaptation of the dynamic method used in vacuum technology to enable direct evaluation of IC performance. We investigated plasma beam transmission through an IC model by generating an argon plasma beam with orbital-velocity ions via an RF plasma source. Different plasma conditions were established, and electrostatic probes were used to characterize the ion current density and energy distributions of the plasma beam. The transmission probabilities measured for the different plasma conditions show that transmission probability remains approximately constant despite variations in total ion current and background pressure. The measured probabilities aligned well with particle simulations accounting for space charge effects, validating our method. However, when the VLEO environment is simulated, the calculated transmission probability differs significantly from the one measured here, highlighting fundamental differences between the plasma beams in our experiments and the hyperthermal neutral flow in VLEO. Biasing the IC to mitigate space charge effects revealed a non-monotonic relationship between transmission probability and intake potential, suggesting that simple wall biasing is insufficient to replicate orbital flow conditions. While numerical extrapolation is necessary to link experimental and VLEO conditions, controlled experiments like this are essential to validate gas-surface interaction models used for high-velocity internal flows. Despite these challenges, the dynamic method adaptation developed in this study is broadly applicable to both plasma and neutral beams, providing a versatile framework for future experimental investigations in atmospheric-breathing electric propulsion systems.
This paper addresses the characterization of the subsonic flow in the 1.2~MW Inductively Coupled Plasma (ICP) wind tunnel at the von Karman Institute for Fluid Dynamics (VKI), targeting chamber pressures of 50 and 100~mbar, and input electric powers between 150 and 300~kW. Ultraviolet to near-infrared optical emission spectroscopy measurements of the free-jet flow are carried out with an updated experimental set-up, calibration procedure, and data processing, providing high-quality absolute spatially-resolved emission spectra. Emission measurements agree with thermochemical equilibrium predictions within a range of conditions, allowing to extract experimental maps of cold-wall heat flux and dynamic pressure against the inferred free-jet enthalpy. A detailed comparison with the characterization methodology traditionally employed is presented, highlighting the need for an improved modeling strategy. Using the measured free-jet temperature and dynamic pressure only, a forward procedure for the computation of the stagnation line flow is proposed. The latter agrees with intrusive heat flux measurements through a range of test conditions, and for values of the recombination coefficient of the reference copper probe commonly found in the literature. Results demonstrate that a consistent framework between numerical simulations and experimental data can be achieved, defining an improved framework for the characterization of the subsonic ICP jet.