Sunil Babu Khatry

Sunil Babu Khatry

Auto-generated profile, based on publicly available information

Sunil Babu Khatry

Nepal Environmental Scientific Services (P) Ltd (NESS), Baneshwor, Nepal

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
31 January 2023 in Journal of Environmental and Public Health
Verified
Journal Article
Open access
PDF file
PNPrasidha Neupane
Prasidha Neupane
IBIswor Bajracharya
Iswor Bajracharya
SKSunil B. Khatry
Sunil B. Khatry
Inexpensive cloth masks are widely used to reduce particulate exposures, but their use became ubiquitous after the outbreak of COVID-19. A custom experimental setup (semiactive at 5.1m/s airflow rate) was fabricated to examine the efficiency of different types of commercial facemasks collected randomly from street vendors. The sample (N=27) including (n=16) cloth masks (CMs), (n=7) surgical masks (SMs), and (n=4) N95 filtering facepiece respirators (FFRs), of which SMs and N95 FFRs taken as a standard for efficiency comparison were all tested against ambient aerosols (PM2.5 and PM10μg/m3). The prototype cloth masks (PTCMs) (N=5) design was tailored, and their performance was assessed and compared with that of standard commercial masks. The filtering efficiency tested against ambient coarse particulates (PM10) ranged from (5 to 34) for CMs with an average of 16, (37 to 46) for SMs with an average of 42, (59 to 72) for PTCMs with an average of 65, and (70 to 75) for N95 FFRs with an average of 71, whereas against fine particulates (PM2.5), efficacy ranged from (4 to 29) for CMs with an average of 13, (34 to 44) for SMs with an average of 39, (53 to 68) for PTCMs with an average of 60, and (68 to 73) for N95 FFRs with an average of 70, respectively. The efficiency followed the order N95 FFRs>PTCMs>SMs>CMs showing poor exposure reduction potential in CMs and high exposure reduction potential in N95 FFRs and PTCMs. Amendment in existing CMs using eco-friendly cotton fabric with better facial adherence can protect human health from exposure to fine particulates <2.5μm and can reduce the risk of micro-plastic pollution caused by polypropylene (PP) facemasks.

1 March 2023 in American Journal of Environmental Sciences
Verified
Journal Article
Open access
PDF file
PNPrasidha Neupane
Prasidha Neupane
IBIswor Bajracharya
Iswor Bajracharya
SKSunil Babu Khatry
Sunil Babu Khatry
Facemasks are widely used worldwide to prevent inhaling airborneparticles and viruses, especially after the outbreak of COVID-19. To assess theeffectiveness of various facemasks against PM10 and PM2.5,experiments with a mannequin head were conducted at 10 and 55 LPM airflowrates. A total of 38 masks, including 26 CMs, 7 SMs, and 5 N95 masks, weretested against PM10 and PM2.5 at 55 LPM airflow rate,while 18 masks, including 10 CMs, 6 SMs, and 2 N95 masks, were tested at 10 LPMairflow rate. The surface morphology of these facemasks was examined using asimple digital microscope of 0.3 M image sensor. SMs and N95 masks had smallerpore sizes and higher porosity, resulting in higher filtering efficiency. Incontrast, CMs had larger pore sizes and lower porosity, leading to poor filtering efficiency. Theaverage pore sizes of SMs and CMs were 70 μm and 160 μm, respectively, whiletheir porosities were 99 pores/mm2 and 20 pores/mm2, respectively. N95FFRshad an average pore size of 49 μm with a porosity of 88 pores/mm2. The averagefiltering efficiency of facemasks followed the order N95 FFRs > SMs >CMs. The Prototype Cloth Masks (PTCMs) were stitched using cottonfabrics with adjustable ear straps, nose pins, and polypropylene (PP) fabric asthe filter. Their filtering efficiency was found to be nearlyequivalent to N95 masks and their performance did not deteriorate even afterfive washing and drying cycles. This facemask can help reduce particulateexposure, particularly in developing countries with high air pollution, such asthe Kathmandu Valley.