17 November 2020 in Silicon
24 September 2021 in Reaction Kinetics, Mechanisms and Catalysis
13 April 2026 in International Journal of Hydrogen Energy
6 July 2026 in SSRN Electronic Journal
LPLuana Do Nascimento Rocha de Paula
Luana Do Nascimento Rocha de Paula
JGJanaina Fernandes Gomes
This work focused on the development of microstructured CuO-ZnO precursors, aiming to elucidate how crystalline phases and microstructures affect metal dispersion and the performance of the catalysts in the conversion of CO2 to methanol. The oxide precursors were synthesized by coprecipitation, coprecipitation followed by hydrothermal treatment and hydrothermal synthesis, using sodium bicarbonate or urea as precipitating agents. In the coprecipitation route, mixtures containing sodium bicarbonate were heated at 70 ºC for 1 h. In the hydrothermal methods, mixtures prepared with sodium bicarbonate or urea were subjected to hydrothermal treatment at 100 ºC for 72 h. Catalytic studies were performed in a continuous-flow reactor operated at 1 bar or 30 bar, using a feed flow rate of 40 mL min-1 and an H2:CO2 molar ratio of 3:1. The coprecipitation method produced segregated multiphase precursors, resulting in materials with undefined morphology, low metal dispersion, and poor catalytic activity. In contrast, hydrothermal syntheses favored the formation of phases such as malachite-rosasite and metastable hydrozincite, suggesting Cu-Zn isomorphic substitution and leading to enhanced metal dispersion, with the morphology of micrograins being strongly influenced by the precipitating agent and the metal composition. Microstructural control, particularly in the form of lamellar microspheres composed of interconnected nanosheets, enhanced the accessibility to the active sites, improving the catalytic activity. The catalyst prepared using urea via hydrothermal synthesis with tumbling showed high activity and stability over 48 h, achieving 16% CO2 conversion and selectivities of 71% to CO and 29% to methanol at 250 ºC and 30 bar.