1 April 2018 in Computer Methods in Applied Mechanics and Engineering
1 January 2014 in Composite Structures
The manufacture of advanced composite panels with variable fibre angles can lead to laminates with a flat profile on one side and a smooth, curved profile on the other. When modelling these laminates in two-dimensional form the flat plate assumptions may no longer accurately capture the structural behaviour. In this paper the buckling behaviour of laminates with one-dimensional fibre variations and symmetric stacking sequences is investigated. The assumptions of modelling the three-dimensional profile as a flat plate or a cylindrical panel are assessed, taking into account the effects of transverse shear deformation. The governing differential equations are solved in the strong form using the Differential Quadrature method and validated by 2D finite element models. The validity of the two modelling approaches is assessed by comparing the solutions to a 3D finite element model capturing the actual shape of the laminate. It is suggested that the buckling event of these variable angle tow, variable thickness laminates is characterised more accurately by “shell-like” than by “plate-like” behaviour. The idea of investigating the effects of two-dimensional fibre orientations with their associated doubly curved topologies is proposed
1 January 2017 in Thin-Walled Structures
16 August 2017 in Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences
This paper introduces conceptual design principles for a novel class of adaptive structures that provide both flow regulation and control. While of general applicability, these design principles, which revolve around the idea of using the instabilities and elastically nonlinear behaviour of post-buckled panels, are exemplified through a case study: the design of a shape-adaptive air inlet. The inlet comprises a deformable post-buckled member that changes shape depending on the pressure field applied by the surrounding fluid, thereby regulating the inlet aperture. By tailoring the stress field in the post-buckled state and the geometry of the initial, stress-free configuration, the deformable section can snap through to close or open the inlet completely. Owing to its inherent ability to change shape in response to external stimuli—i.e. the aerodynamic loads imposed by different operating conditions—the inlet does not have to rely on linkages and mechanisms for actuation, unlike conventional flow-controlling devices.
17 April 2019 in Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences
The collapse of axially compressed cylinders by buckling instability is a classic problem in engineering mechanics. We revisit the problem by considering fully localized post-buckling states in the form of one or multiple dimples. Using nonlinear finite-element methods and numerical continuation algorithms, we trace the evolution of odd and even dimples into one axially localized ring of circumferentially periodic diamond-shaped waves. The growth of the post-buckling pattern with varying compression is driven by homoclinic snaking with even- and odd-dimple solutions intertwined. When the axially localized ring of diamond-shaped buckles destabilizes, additional circumferential snaking sequences ensue that lead to the Yoshimura buckling pattern. The unstable single-dimple state is a mountain-pass point in the energy landscape and therefore forms the smallest energy barrier between the pre-buckling and post-buckling regimes. The small energy barrier associated with the mountain-pass point means that the compressed, pre-buckled cylinder is exceedingly sensitive to perturbations once the mountain-pass point exists. We parameterize the compressive onset of the single-dimple mountain-pass point with a single non-dimensional parameter, and compare the lower-bound buckling load suggested by this parameter with over 100 experimental data points from the literature. Good correlation suggests that the derived knockdown factor provides a less conservative design load than NASA's SP-8007 guideline.