Francesco Greco

Francesco Greco

Auto-generated profile, based on publicly available information

Francesco Greco

Millimeter-Wave Antennas and Integrated Circuits Laboratory (MAIC), University of Calabria DIMES, 87036 Quattromiglia, CS, Italy

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 July 2020 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
emilio arnieriemilio arnieri
emilio arnieri
FGF. Greco
F. Greco
GAGiandomenico Amendola
Giandomenico Amendola
A broadband and wide-angle scanning linear-to-circular polarization converter based on a dual-layer structure is presented. The elementary cell is composed of conventional Jerusalem Crosses (JC). The design procedure is based on transmission line circuit model and on full-wave simulations. The proposed equivalent circuit has been generalized to include the oblique incidence in the model. Simulated results demonstrate a 24% axial ratio bandwidth for an incidence angle θ=±50° in both x-z and y-z planes. The proposed converter provides a unique combination of wide bandwidth, thin profile, and stable response with respect to the angle of incidence. It can be integrated into any linearly polarized antenna system to generate circular polarization without significantly affecting the antenna performances.

9 January 2020 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
emilio arnieriemilio arnieri
emilio arnieri
FGFrancesco Greco
Francesco Greco
LBLuigi Boccia
Luigi Boccia
GAGiandomenico Amendola
Giandomenico Amendola
A Polarization Rotator based on Substrate Integrated Waveguide (SIW) is proposed in this paper. The rotator is designed as a dual band, single layer, Frequency Selective Surface (FSS) that transmits a wave rotated of 90-degree with respect to the incident one in one of the two bands maintaining unchanged the polarization in the other one. Other than the design and characterization of the rotator, its application to a linear-to-circular dual band polarizer is also investigated. To this purpose, the rotator is coupled to a conventional meander line polarizer generating orthogonal circular polarizations (CP) in the two bands. This configuration is useful in SatCom applications where the required high isolation between TX and RX channels is obtained assigning orthogonal polarizations to the two bands. As a design example, a prototype is designed and experimentally validated in the SatCom K/Ka-bands. Measured performance shows an isolation between the TX and RX channels of more than 35 dB and insertion losses which do not exceed 1.5 dB in the two operating bands.

21 July 2023 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Open access
RMRaffaele De marco
Raffaele De marco
emilio arnieriemilio arnieri
emilio arnieri
FGFrancesco Greco
Francesco Greco
ABArman Bordbar
Arman Bordbar
GAGiandomenico Amendola
Giandomenico Amendola
LBLuigi Boccia
Luigi Boccia
In this work, a new dual-band dual-polarized transmitarray antenna element based on multilayer frequency selective surfaces is introduced. This novel configuration has been successfully tested for K/Ka SatCom frequency bands and is composed of a single low-profile printed circuit board incorporating 5 metal layers without any vertical transitional elements. In contrast to existing solutions, this proposal eliminates the need for vertical interconnections, air gaps, or spacers between the metal layers, resulting in a cost-effective board with an overall thickness of 0.24λ 0 at 30 GHz. The proposed unit cell operates at 20 and 30 GHz exploiting an interleaved lattice configuration. It affords independent control of the transmitted field phase within a range of 300 degrees, at both frequency bands, while maintaining a transmission loss not exceeding 3.5 dB. To substantiate the proposed design, an 87×87mm 2 transmitarray has been prototyped and experimentally validated. The measured results indicate a peak gain of 20.6 and 22.8 dBi at 20 and 30 GHz, respectively. Furthermore, the -1dB gain bandwidth has been found to be 5% in the first band and 4.5% in the second band.

15 October 2018 in IEEE Antennas and Wireless Propagation Letters
Verified
Journal Article
Closed access
emilio arnieriemilio arnieri
emilio arnieri
FGFrancesco Greco
Francesco Greco
LBLuigi Boccia
Luigi Boccia
GAGiandomenico Amendola
Giandomenico Amendola
A new configuration of a planar grid array antenna for automotive radar applications operating in the 77-81 GHz frequency band is introduced. The proposed array is based on miniaturized loop elements which are designed to maintain the mutual inter element distance along the azimuthal plane to less than half free-space wavelength thus allowing better scanning performance in the final radar system. Moreover, to enhance the gain bandwidth performance, the antenna adopts multi-resonant cells realized using variably dimensioned radiation elements. The proposed design was validated experimentally and it is fully compliant with multichannel MMICs designed for automotive radar sensor applications.

29 May 2019 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
FGF. Greco
F. Greco
LBLuigi Boccia
Luigi Boccia
emilio arnieriemilio arnieri
emilio arnieri
GAGiandomenico Amendola
Giandomenico Amendola
A novel dual band cylindrical reflector antenna with a hat feed is presented. A horn in a parallel plate waveguide illuminates a parabolic surface to generate a TEM wave used to illuminate a corrugated feed. The feed is designed using a double step corrugation optimized to obtain good radiation patterns and good matching on the two bands of interest. The design of the grooves is based on the analysis of the radiation characteristics of the corrugated surface. In particular, the power re-radiated by the corrugation is considered ascertaining features, which prove to be extremely useful in simplifying the design of the feed. The solution proposed in the paper makes possible to realize an antenna with compact size and low cost without sacrificing efficiency and compliance with radiation masks.

15 September 2021 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
emilio arnieriemilio arnieri
emilio arnieri
Marco SalucciMarco Salucci
Marco Salucci
FGF. Greco
F. Greco
LBLuigi Boccia
Luigi Boccia
AMAndrea Massa
Andrea Massa
GAGiandomenico Amendola
Giandomenico Amendola
A dual-band reflection-mode wide-bandwidth and wide-angle scanning circular polarizer is designed. The proposed polarizer can convert linearly-polarized waves into Right- and Left-Hand Circularly Polarized (RHCP and LHCP) waves in the two separate non adjacent receiving and transmitting K/Ka frequency bands. The polarizer is based on dual-layer dipole arrays printed on both sides of a dielectric substrate separated by a second substrate from the ground plane. An analytic model based on transmission lines equivalent circuits is developed. Closed-form expressions are derived to demonstrate the operating principle providing a simple design procedure. The proposed model can be used to optimize the converter for a specific propagation angle of the incident wave. Finally, a System-by-Design (SbD) strategy is proposed to improve the performance of analytically-synthesized devices. Towards this goal, a computationally-efficient “digital twin” of the accurate full-wave model is built to speed up the solution space exploration and efficiently reach the global optimum. A prototype is designed for the incident angle θ0=30° and it is shown that axial ratio lower than 3dB is maintained for a wide-angle field of view of Δθ=60° (θmin = 0°, θmax = 60°) in both frequency bands.