The microstructure evolution of Fe-17 wt. % Cr-12 wt. % Ni-2 wt. % Mo stainless steel fiber felts during the fast sintering process was investigated by the synchrotron radiation X-ray computed tomography technique. The equation of dynamics of stable inter-fiber neck growth was established for the first time based on the geometry model of sintering joints of two fibers and Kucsynski’s two-sphere model. The specific evolutions of different kinds of sintering joints were observed in the three-dimensional images. The sintering mechanisms during sintering were proposed as plastic flow and grain boundary diffusion, the former leading to a quick growth of sintering joints.
30 July 2026 in Journal of Materials Research and Technology
Sintering diagram for copper fibers is established based on a two joint-fiber geometric model and intrinsic material constants, with comprehensive consideration of four neck-growth mechanisms: volume diffusion, grain-boundary diffusion, surface diffusion and Nabarro-Herring microcreep. The sintering diagram reveals that grain-boundary diffusion dominates neck growth at relatively low temperatures, surface diffusion prevails at high temperatures for short holding time, and Nabarro-Herring microcreep acts as the primary mechanism at high temperatures for long holding time, respectively. In addition, synchrotron radiation X-ray computed tomography (SR-CT) characterization is adopted to validate the established sintering diagram via the measured neck size of sintered fiber joints. The experimental results show that most measured neck-size data points lie close to the theoretical curve predicted by the Nabarro-Herring microcreep mechanism when sintered at 1030 oC for 30 min, 60 min and 180 min. This result confirms that Nabarro-Herring microcreep is the predominant neck-growth mechanism at high temperatures for long holding time, which is consistent with the theoretical result derived from the sintering diagram. Meanwhile, the results also prove the existence of Nabarro-Herring microcreep during the high-temperature sintering of copper fibers without externally applied pressure.