This article explores the use of waste from polymetallic combines in South Kazakhstan, specifically tailings from the Achisay and Ansay deposits, as aggregates (crushed stone, sand) and mineral additives (dispersed barite powder) for producing concrete with specified operational properties. These secondary raw materials are now abundant in relation to their use, which makes them an affordable and accessible alternative for the manufacturing of concrete while also promoting environmental sustainability. X-ray diffraction, differential thermal analysis, and scanning electron microscopy of enriched barite ores in these tailings revealed valuable components, such as calcite, quartzite, and dolomite, suitable for use as aggregates and mineral additives. The calcite and quartzite content in the Ansay samples exceeds that in the Achisay samples. Concrete mixes with various proportions of crushed stone and sand from these tailings were prepared, and their working characteristics were analyzed. The impacts of filler content and grain composition on the characteristics of concrete mixtures were identified, and the requirements for optimizing aggregate grain composition to produce heavy concrete with desired qualities were determined. Heavy concrete with densities from 2300 to 2839 kg/m3 and compressive strengths from 41.6 to 58.2 MPa was developed. Physical and mechanical properties, including density, water absorption, frost resistance, and compressive strength, were also evaluated, confirming the feasibility of using technogenic waste in composite heavy concrete production.
21 August 2025 in Construction Materials and Products
At present, the primary objective of the road construction industry is to increase the service life of road pavements by implementing innovative technologies that meet modern standards of operational reliability. The key advantages of bitumen emulsions were analyzed, including improved adhesion and cohesion, environmental safety, resistance to water exposure, rapid curing and opening to traffic, applicability under cold conditions, as well as enhanced stability and durability. The research findings confirm the benefits of using bitumen emulsions in road construction, contributing to high-quality and long-lasting pavement performance. Studies were conducted on the modification of petroleum bitumen. The additional incorporation of Kulantau vermiculite into the composition enhances and stabilizes adhesion across a wide range of ambient humidity and temperature conditions. The adhesion process can be regarded as the adsorption of bitumen emulsion on the surface of mineral aggregates. Adsorption occurs through intermolecular interactions, and adhesion is improved by strengthening these interactions, which is achieved by increasing the activity of the bitumen emulsion through the introduction of additives with active functional groups. It was found that incorporating secondary polyethylene and Kulantau vermiculite into asphalt concrete leads to a noticeable decrease in the air void content. This reduction enhances the material’s resistance to moisture and freeze-thaw cycles.