4 January 2000 in Physical Review A
We report the observation of the electromagnetically induced inhibition of two-photon absorption with atomic sodium vapor as a test medium. A 60% reduction of two-photon resonant absorption was recorded at the transition when a cw coupling laser was applied at the transition.
5 October 2015 in Applied Physics Letters
By developing a low-temperature (≤300 °C) fabrication process for the gate-stack structure on Ge(111), we study electrical properties of thin film transistors (TFTs) consisting of (111)-oriented pseudo-single-crystalline-germanium (PSC-Ge) channels on glass. Although the Hall mobility ( ) of p-type PSC-Ge layers reaches 210 cm2/V s and the gate-stack/Ge interface has low trap density, we observe field-effect-mobility (μFE) fluctuation in the p-channel TFTs from 8.2 to 71 cm2/V s, depending on the thickness of the PSC-Ge layer. Considering the μFE fluctuation and low ratio in the p-TFTs, we infer the presence of defective Ge layers near the surface of the glass substrate. This study reveals that it is quite important for the high-performance p-Ge TFTs to improve the quality of the Ge layer near the surface of the glass substrate or to choose other materials with better Ge/substrate interface qualities.
9 May 2011 in Applied Physics Letters
We succeeded in Ohmic contact formation on an n-Ge substrate by direct sputter deposition from a TiN target and subsequent postmetallization annealing (PMA) at . The Schottky barrier heights of the TiN/n-Ge and TiN/p-Ge contacts were 0.18 eV and 0.50 eV, respectively, and were maintained up to a PMA temperature of . These electrical characteristics are likely to be associated with an approximately 1-nm-thick interlayer formed at a TiN/Ge interface, which leads to the alleviation of the Fermi level pinning. We demonstrated the validity of the TiN/n-Ge contact using an junction, which showed an excellent ideal factor of .
31 March 2014 in Applied Physics Letters
TiN/Ge contacts, prepared by direct sputter deposition from a TiN target, can alleviate the intrinsic Fermi-level pinning (FLP) position toward the conduction band edge. This work focuses on studying the origin of the FLP alleviation. Investigations on both the electrical properties and interfacial structures of TiN/Ge contacts showed that an amorphous interlayer (IL) containing nitrogen played an important role in the alleviation. For comparison, the properties of Ti/Ge contacts were also studied. Based on these results, the IL structure that induced the FLP alleviation was clearly shown and a model was proposed to explain the FLP alleviation.
27 April 2011 in Applied Physics Express
10 September 2007 in Applied Physics Letters
The effective work function of TaN on after postmetallization annealing (PMA) was investigated using as a sample structure. We found that on is stable at PMA temperatures of less than and is , which is approximately higher than that on . In contrast, is modulated by PMA at temperatures greater than . An analysis by x-ray photoelectron spectroscopy suggests that the increased is strongly related to Ta oxide formation near the interface. The modulation of on is discussed on the basis of intrinsic and extrinsic Fermi level pinning due to Ta–O bond formation at the interface.