23 December 2025 in Astronomy & Astrophysics
Context . The radiation pattern of a radio telescope antenna, particularly in terms of the pointing deviation (PD) and peak gain loss (PGL), is critical for determining the telescope’s front-end sensitivity and angular resolution. These performance indices are highly susceptible to deformations of the primary reflector induced by external loads such as gravity and wind. Active optics, which involves adjusting actuators mounted on the backup structure of the primary reflector, offers a promising solution. However, the underlying mechanism linking actuator adjustment to variations in the radiation pattern is not well understood. Aims . This research aims to uncover the relationship between actuator adjustment and key performance indicators of a radiation pattern (i.e., PD and PGL) by establishing a reliable analytical framework that enables the precise optimization of the antenna’s electromagnetic characteristics. Methods . We investigated the radiation pattern of the 10.4 m Leighton Chajnantor Telescope (LCT) antenna under various actuator configurations using the aperture integration method for segmented reflectors (AIMSR). Based on the simulation results, we propose a superposition principle (SP) that approximates the cumulative effect of multi-actuator adjustment as the linear combination of their individual contributions. The mathematical model we developed on the basis of this principle is aimed at describing the functional relationship between actuator displacements and the resulting PD and PGL. Results . Numerical experiments confirm the accuracy of the SP in capturing the effects of actuator-induced deformation on the radiation pattern. Furthermore, the SP-based mathematical model is validated by its successful application in optimizing actuator configurations to minimize the PD and PGL of LCT’s antenna, thereby enhancing the radiation performance under external loads. Conclusions . Our findings demonstrate that the proposed SP method provides a physically interpretable and computationally efficient approach to model and optimize the active control of large segmented reflectors. This approach lays the groundwork for high-precision pointing correction for future submillimeter radio telescopes.
6 March 2026 in IEEE Transactions on Antennas and Propagation
Gravitational and temperature fields are the primary factors affecting telescope surface accuracy. An ideal active surface adjustment system needs to evaluate the surface changes caused by these factors in real time and compensate as needed. However, current micron-level surface measurements are time-consuming, which restricts real-time evaluation. Based on the 10.4-m Leighton Chajnantor Telescope (LCT), we propose a method that continuously evaluates the primary surface shape in real time, while performing on-demand adjustments during non-observing periods. This method uses the rigging angle as the reference and considers only relative quantities. To improve the efficiency of surface evaluation, we precompute the surface deformations caused by zenith angle changes and by several temperature fields, each defined by a specific three-dimensional (3D) Chebyshev basis function. The actual temperature-induced deformation is obtained by linearly combining these deformation results using the coefficients from the Chebyshev polynomial fitting of the measured temperature field. We precompute the surface deformation produced by a 1°C increase in each steel-rod standoff and then formulate a constrained quadratic programming (QP) problem to determine the adjustment values. To improve computational efficiency, we linearize the residual vector from the paraboloid fit when solving this QP. The proposed method is designed to improve the performance of the dish surface optimization system (DSOS) of the LCT.