In recent years, many studies on the prevention of icing on highways and airports through the use of electrically conductive asphalt pavements have been carried out. However, although electrical conductivity in asphalt mixtures has been extensively investigated, the gradation in conductive stone mastic asphalt (SMA) mixtures has not yet been studied in detail. The main purpose of this study was to investigate, for the first time, the effect of aggregate gradation variation on the electrical resistivity and temperature change of electrically conductive SMA. Samples of conductive SMA were produced using three different aggregate gradations (series 1A, 2A and 8S) and 5 mm long carbon fibres (0.2% by weight) as the conductive component. Marshall mix design was performed on series 1A, 2A and 8S. The samples were tested for volume resistivity, temperature change under constant electrical voltage and ultrasonic pulse velocity and the results were compared. The results showed that a change in aggregate gradation had a significant effect on the electrical conductivity properties of the conductive SMA, with a denser gradation of the SMA mixture leading to higher electrical conductivity.
Due to advantages like abrasion resistance, increased operating and service life, high coarse aggregate content and high resistance to deformation, increased fatigue life, and others, stone mastic asphalt (SMA) mixtures have recently become a popular asphalt pavement type in road sections such as highways, tunnels, and bridges. There hasn't been much research on the topic, despite the fact that gradation significantly affects the performance of SMA combinations. In this study, the experimental findings of three distinct gradations of SMA mixtures with hybrid materials (basalt coarse aggregate, limestone fine aggregate) and carbon fiber were compared. As a result, it was concluded that the hybrid aggregate used with carbon fiber, maximum aggregate size, and coarse aggregate % had a positive impact SMA mixtures.