13 January 2022 in International Journal of Pavement Engineering
This paper presents an augmented full quadratic model (AFQM), artificial neural network (ANN) and an innovative machine learning technique called self-validated ensemble modelling (SVEM) approaches to predict low-temperature fracture energy of asphalt mixtures. An experimental database including 852 fracture energy values obtained from low temperature disk-shaped compact tension (DCT) testing was utilised to develop the prediction models. The fracture energy was predicted in terms of several variables that are available during the mix design process. The collected data were categorised into three groups based on the availability of the data at different points during the mix design process. A sensitivity analysis was conducted to assess the impact of the design variables on fracture energy. Based on the model development results, both ANN and SVEM methods showed higher prediction accuracy than AFQM. Prediction models based on the ANN were time-consuming and computationally expensive due to the optimum model architecture. The SVEM technique was found to be a reliable prediction method with high prediction reliability even with a limited amount of data. Based on the sensitivity analysis, design traffic level, PG low temperature (PGLT) binder grade, amount of aggregate passing 9.5 mm sieve, and the voids in mineral aggregate (VMA) are the most effective factors impacting low-temperature asphalt mixture fracture energy. A web-based prediction model platform was developed using prediction models based on the SVEM technique which can be utilised as a predesign tool to evaluate low-temperature fracture energy of asphalt mixtures when laboratory testing is not feasible.
1 September 2022 in Journal of Materials in Civil Engineering
The purpose of this study was to conduct a performance evaluation to investigate the effect of a newer type of asphalt binder modification system and to demonstrate the importance of performance prediction modeling over use of only mix stiffness or a single performance index property to compare asphalt binder modification systems. Four asphalt mixtures with different amount of modifiers were evaluated in this study. Laboratory characterization included complex modulus, direct tension cyclic fatigue, cracking tolerance index, disk-shaped compact tension, indirect tensile creep and strength, and Hamburg wheel tracking tests. In addition, advanced performance prediction programs including AASHTOWare Pavement ME, FlexPAVE, and IlliTC were utilized to predict mixture performance. Based on the results of laboratory testing and performance simulations, the reactive isocyanate-based modifier (RIB) and styrene-butadiene-styrene (SBS) modifiers improved the properties and performance of the control mixture with respect to rutting and fatigue cracking but may have a negative effect with respect to thermal cracking. Modification of the control mixture with the combination of RIB and SBS balanced good rutting and fatigue cracking performance while maintaining thermal cracking resistance, indicating that the RIB + SBS modification may be a good candidate for further evaluation and field trial consideration.
1 December 2022 in Journal of Transportation Engineering, Part B: Pavements
This study assessed the cracking performance of warm-mix asphalt (WMA) and reclaimed asphalt pavement (RAP) mixtures for airfield pavements and explored performance-based airfield asphalt mix specifications. Fundamental properties of these mixtures were investigated through performance-based laboratory tests such as complex modulus, semicircular bend (SCB), and direct tension cyclic fatigue (DTCF) tests. Performance prediction software was utilized to evaluate mixture performance during the design period. Based on the complex modulus and SCB tests results, it was found that organic additive and RAP tend to increase mixture susceptibility to fracture. Results of the DTCF test showed that fatigue indexes ranked mixtures in different ways, which emphasizes the importance of using performance prediction programs to investigate mixture fatigue performance. The results of performance prediction indicated that utilization of hybrid WMA additive and RAP would increase airfield pavement fatigue damage. The contradictory results of laboratory tests and pavement performance simulation showed that the airfield current asphalt pavement thickness design procedure lacks a usable model of fatigue cracking in its standard design program.
3 September 2025 in Transportation Geotechnics
1 January 2021 in Advances in Civil Engineering Materials
Asphalt mixtures contain several constituents, among which air void content has a significant effect on pavement performance. In this research, the impact of laboratory compaction air-void variations for asphalt mixtures was investigated on asphalt-mixture fracture energy and peak load, as two primary outcomes of the disk-shaped compact tension test. Two groups of asphalt mixtures with air void contents of 7 ± 1.0 % were selected, and comprehensive statistical analyses, such as Pearson’s correlation coefficient, analysis of variance (ANOVA), Welch’s test, and Tukey’s test, were conducted to explore any possible impacts of specimen-to-specimen air-void variation on fracture energy and peak load. Statistical analyses have been carried out on individual asphalt mixtures in groups and all asphalt mixtures together as a group, as well. Results showed that there is a weak-to-negligible relationship between air void, fracture energy, and peak load. In addition, results of the ANOVA at the significance level of 0.05 revealed that air void content does not have any significant effect on asphalt mixtures’ fracture energy and peak load, except for peak load data when all asphalt mixtures are grouped as single population. Finally, results of Tukey’s test demonstrated that in a range of 7 ± 1.0 %, air void does not have a significant effect on fracture energy at the significance level of 0.05. The findings of this study can help researchers and agencies extend the air-void variation tolerance to 1 % in asphalt mixtures with target of 7 % air void content to assess low temperature cracking resistance.
4 September 2025 in Transportation Geotechnics