We propose practical six-junction (6J) inverted metamorphic multijunction (IMM) concentrator solar cell designs with the potential to exceed 50% efficiency using moderately high quality junction materials. We demonstrate the top three junctions and their monolithic integration lattice matched to GaAs using 2.1-eV AlGaInP, 1.7-eV AlGaAs or GaInAsP, and 1.4-eV GaAs with external radiative efficiencies >0.1%. We demonstrate tunnel junctions with peak tunneling current >400 A/cm2 that are transparent to <2.1-eV light. We compare the bottom three GaInAs(p) junctions with bandgaps of 1.2, 1.0, and 0.7 eV grown on InP and transparent metamorphic grades with low dislocation densities. The solution to an integration challenge resulting from Zn diffusion in the GaAs junction is illustrated in a five-junction IMM. Excellent 1-sun performance is demonstrated in a complete 6J IMM device with V${}_{\rm OC}$ = 5.15 V, and a promising pathway toward >50% efficiency at high concentrations is presented .
The emission of light from each junction in a series-connected multijunction solar cell both complicates and elucidates the understanding of its performance under arbitrary conditions. Bringing together many recent advances in this understanding, we present a general 1-D model to describe luminescent coupling that arises from both voltage-driven electroluminescence and voltage-independent photoluminescence in nonideal junctions that include effects such as Sah-Noyce-Shockley (SNS) recombination with n ≠ 2, Auger recombination, shunt resistance, reverse-bias breakdown, series resistance, and significant dark area losses. The individual junction voltages and currents are experimentally determined from measured optical and electrical inputs and outputs of the device within the context of the model to fit parameters that describe the devices performance under arbitrary input conditions. Techniques to experimentally fit the model are demonstrated for a four-junction inverted metamorphic solar cell, and the predictions of the model are compared with concentrator flash measurements.
We analyze the quantum efficiency measurement of a series-connected multijunction solar cell by modeling the cell as an ac resistive-capacitive circuit and studying the complex current as a function of the light biasing. The photocurrent induced by directly absorbed photons is modeled as an independent current source, whereas the luminescent coupling current from higher bandgap to lower bandgap subcells is modeled as a dependent current source in the bottom subcell. We derive expressions for the equivalent impedance and the complex current in measurements of the top and bottom subcells of a two-junction device. High light biasing of the nonlimiting cell drives the magnitude and phase shift of the current toward well-defined limits, but insufficient light biasing yields a composite response that is not fully characteristic of either subcell. We recommend that the experimenter always monitor the phase shift of the signal for signs of insufficient light biasing, and to help identify genuine luminescent coupling effects.
The structure and electronic properties of reconstructed cores of 90° partial dislocations in GaAs are studied using first-principles methods. We find that a double-period reconstruction is most stable for an As-core whereas a single-period reconstruction is most stable for a Ga-core. We show that As and Ga dimers induce detrimental deep electronic states. These deep levels can be partially removed by introducing passivating dopants that break dimers in the dislocation core.
Strings constructed from three-terminal tandem (3TT) solar cells offer the performance benefits of voltage-matching (which reduces sensitivity to spectral variation), but without the subcell voltage isolation required by four-terminal cells. However, the circuitry for a 3TT string can become complex, making circuit analysis more challenging. Here, we illustrate the essential features of “homogenous” voltage-matched (VM) 3TT strings, for which all 3TT cells in the string are nominally identical (with the same design/doping sequence, such that they can be fabricated on the same manufacturing line). Several representative VM string configurations are explicitly considered, and used to describe the general construction of string I(V) curves. End losses intrinsic to these strings are discussed in detail, along with mitigation strategies to minimize their impact. Our analysis agrees with experimental results for eight-cell strings constructed from GaInP/GaAs 3TT devices.