2 June 2008 in Materialwissenschaft und Werkstofftechnik
15 August 2016 in Journal of Vibroengineering
Command shaping is an important open-loop control method for improving the settling time and positioning accuracy. This technique also minimizes residual vibrations. Shaped command profiles are formed by convolving a sequence of impulses or solving special functions for the desired command signal. To determine the input shaper controller commands, estimated values of the system natural frequency and damping ratio are required to make the necessary calculations. However, real systems cannot be modelled precisely, while robustness of the shaper to modelling errors is an important design consideration. Many robust input shapers have been developed and reported in the literature. It has been observed that the robust shapers typically have longer travelling time durations that lead to slow system response. This makes a relationship between shaper rising/travelling time and robustness. This paper presents a review of command shaping methods and analyses the compromise between duration of motion and shaper robustness for positive and smoothly shaped reference commands.
1 February 2007 in Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy
The paper presents a time domain model of a heaving buoy wave-energy converter and investigates the tuning problem in irregular seas. The tuning issue is addressed by employing both fixed (passive) and adaptive (active) power-take-off settings. The fixed power-take-off tuning approach includes models based on tuning the device natural frequency to either the energy frequency or peak frequency of the sea-state or a weighted average of several peak frequencies. The adaptive tuning approaches employ a sliding discrete Fourier transform frequency analysis, or a time-series analysis of the measured wave elevation and device velocity to estimate a localized dominant wave frequency and hence calculate power-take-off settings. The paper presents details of these tuning techniques by discussing issues related to the modelling, simulation, and predicted power captures for each method. A comparative study of each method along with practical implications of the results and recommendations are also presented.
20 June 2011 in Journal of Vibration and Control
This paper presents a hybrid input shaping method to eliminate residual vibration of multi-mode flexible systems. This method, initially designed for one degree of systems, is modified to apply on linear and nonlinear multi-mode systems. In this method, firstly the flexible system is uncoupled using modal analysis method, and then the parameters of the decoupled system are used to shape the command template signal. A ramp plus ramped cycloid plus ramped versine is proposed as the command template signal to be preshaped. The template function is preshaped to yield zero residual vibration for point to point motion and then the resulting trajectory is convolved with a sequence of two impulses to obtain a twice shaped input. The proposed method is applied to eliminate residual vibration of a linear multimass and flexible joint manipulator types of systems. Simulation results show that the oscillations are considerably decreased with a high degree of robustness in the presence of system parameters uncertainty.
1 October 2020 in International Journal of Hydrogen Energy