13 December 2021 in Journal of Materials Chemistry A
Reducing damage caused by sputtering of transparent conductive oxide (TCO) electrodes is critical in achieving highly efficient and stable perovskite/silicon tandem solar cells. Here we study the sputter caused damage to bathocuproine (BCP), which is widely used in highly efficient p–i–n structure single junction perovskite solar cells. While the BCP buffer layer protects the underlying layers from damage, it itself can be damaged by sputtering of TCOs at a wide range of target–substrate distances, supported by molecular dynamics simulation. More intriguingly, it is observed that TCO easily peeled off after sputtering when the sputtering target is close to the substrate. This is ascribed to the formation of stress during the cooling down process after sputtering due to different thermal expansion coefficients of the layers. Our studies explain why tin oxide (SnO2) made by atomic layer deposition can replace BCP for a much better tandem device performance. SnO2 has high affinity with the sputtered TCO electrode to suppress the peeling-off issue and has higher bond energy to resist sputter induced damage, thus allowing a wider window of target–substrate distances than BCP during TCO sputtering. Ultimately, we demonstrate an efficient perovskite/silicon monolithic tandem solar cell with an efficiency of 26.0% to illustrate the beneficial effects of reduced stress and damage.
1 January 2005 in Progress In Electromagnetics Research
—This paper focuses on the complex guided wave solutions of grounded slab made of metamaterials. Complex solutions of both TE and TM modes,have been analyzed. It is found that they are distributed on the proper Riemann sheet. This property differs dramatically from that of a conventional grounded slab. A number of other distribution properties are studied analytically. Some numerical examples are given to verify the analytical results. It is important to take the peculiar complex solutions into account in the problems of microstrip and surface wave excitation.
25 March 2020 in Chemistry – A European Journal
5 May 2023 in Materials Research Bulletin
22 November 2023 in Applied Physics Reviews
Metal halide perovskites (MHPs) have attracted wide interest in spintronics. In addition, they also perform various spin–orbit coupling (SOC) strength due to their complex crystal structures. The control of SOC strength has been an increasingly prevalent topic for the manipulation of the spin degree in spintronic devices. Here, we fabricate MAPbI3 films possessing cubic crystal phase and tetragonal crystal phase with Pb vacancies. Circular photogalvanic effect (CPGE) measurements indicate that CN, representing the difference between right and left circularly polarized photocurrents, of the tetragonal structure with Pb vacancies (CN = 0.6316) is almost three orders of magnitude larger than that of the cubic structure (CN = 0.0009). Combining with the density functional theory calculations, we confirm that the strength of SOC generating the CPGE could be tuned by crystal phases of MAPbI3, and the existence of Pb vacancies could remarkably enhance the spin splitting of the band structure. Our finding provides a possible way for clarifying various puzzling SOC performances in MHPs and paves the way for spintronic device applications and circularly polarized photoelectric detectors by controlling the crystal phases and defects.
1 January 2013 in Acta Physica Sinica
We propose and demonstrate an optical single sideband (OSSB) modulation approach with continuously tunable optical carrier-to-sideband ratio (OCSR) theoretically and experimentally. In the proposal, one dual-parallel Mach-Zehnder modulator (DP-MZM) acts as a key component. By properly setting the modulator, three separate sub-modulators inside the DP-MZM can be used to realize the OSSB modulation, optical carrier phase-shift, and lightwave interference. By adjusting the bias voltage of one sub-modulator, the OCSR can be tuned continuously. In the experiment, the tuning range of OCSR is found to be between-20.8 dB and 23.5 dB at modulation index m=0.2. We also analyze the relationship between the OCSR and RF power after detection. It is found that with properly adjusting the OCSR, the receiver sensitivity can be greatly improved.