17 January 2022 in Energy & Environmental Science
JCJonathan Clarke-Hannaford
Jonathan Clarke-Hannaford
+3
The direct conversion of CO2 to carbon is a highly providential route; however, conventional thermal and catalytic approaches are hindered by high energy demands and are limited by coking. Here, we report a robust and highly selective method for the direct conversion of CO2 to solid carbon over EGaIn liquid metal (LM) alloy. We utilized the low-melting point of this alloy to facilitate the reduction of CO2 at low temperatures, producing 319 μmol h−1 of carbon at 200 °C, and remarkably enabling CO2 activation and carbon production even at room temperature, without the use of a supplementary reductant such as hydrogen. The deployed LM showed no signs of deactivation by coking and the generated carbon is shown to naturally accumulate at the top of the LM where it can be easily collected. In situ XPS measurements indicate an increase of 9.6% in the carbon–carbon bond content and an equivalent decrease in the Ga metal content, upon exposure of the LM to CO2 for 30 mins at 200 °C and 1 bar. This led to the conclusion that solid carbon and gallium oxide are the final reaction products of this process. Density functional theory calculations shed further light on the adsorption and dissociation of CO2 over Ga and EGaIn. The presented method creates a pathway to transforming CO2 to perpetually stored solid carbon and can therefore set a trajectory for making a measurable impact on carbon intensive industries.
20 December 2023 in Nature Catalysis
VKVaishnavi Krishnamurthi
+1
19 September 2024 in Nature Catalysis
1 January 2022 in Journal of Colloid and Interface Science
30 October 2023 in ChemCatChem
Significant progress has been made in recent years in the development of liquid metal alloy catalysts. This article provides an overview of the state‐of‐the‐art research pertaining to liquid metal alloy catalysis, including alloy synthesis, reactor design, and theoretical calculations. Different alloy synthesis methods are discussed with a focus on strategies that can achieve colloidal intermetallic structures in liquid metal alloys. Current reactors for liquid metal‐based electrocatalytic and thermochemical processes are summarized. The application of theoretical tools, such as machine learning and computational chemistry to further liquid metal alloy design, is discussed. Finally, an outlook on the technological challenges and our perspective on future research opportunities for liquid metal alloy catalysis are presented.
5 May 2024 in Advanced Science
VKVaishnavi Krishnamurthi
+10
Crystallization of alloys from a molten state is a fundamental process underpinning metallurgy. Here the direct imaging of an intermetallic precipitation reaction at equilibrium in a liquid‐metal environment is demonstrated. It is shown that the outer layers of a solidified intermetallic are surprisingly unstable to the depths of several nanometers, fluctuating between a crystalline and a liquid state. This effect, referred to herein as crystal interface liquefaction, is observed at remarkably low temperatures and results in highly unstable crystal interfaces at temperatures exceeding 200 K below the bulk melting point of the solid. In general, any liquefaction process would occur at or close to the formal melting point of a solid, thus differentiating the observed liquefaction phenomenon from other processes such as surface pre‐melting or conventional bulk melting. Crystal interface liquefaction is observed in a variety of binary alloy systems and as such, the findings may impact the understanding of crystallization and solidification processes in metallic systems and alloys more generally.