In this study, a modified sol–gel method was used to synthesize pure TiO2 and TiO2/CeO2-based materials, followed by the loading of 3 wt.% silver ions onto the catalyst surfaces using a wet-impregnation method. All synthesized and modified catalysts were characterized using Brunauer–Emmett–Teller (BET), scanning electron microscopy (SEM), and X-ray diffraction (XRD) techniques to analyze their textural, morphological, and structural properties. The photocatalytic activity of these materials was evaluated for the degradation/decolorization of crystal violet (CV) dye under ultraviolet (UV) irradiation. Moreover, the effects of various process parameters, including initial dye concentration, catalyst amount, and UV wavelength, on photocatalytic efficiency were analyzed. The results indicated that the addition of CeO2 and Ag into the TiO2 catalyst significantly enhanced the photocatalytic activity compared with pure TiO2 under identical experimental conditions. Further analysis of the photocatalytic process demonstrated that the TiO2/CeO2 binary oxide catalyst, as well as Ag-doped samples (TiO2/Ag and TiO2/CeO2/Ag), exhibited improved photocatalytic performance relative to pure TiO2.
20 June 2025 in Studia Universitatis Babeș-Bolyai Chemia
In this study, TiO2-based catalysts were synthesized using a modified sol-gel method. The catalysts were prepared at two different pH values (10 and 13) and were subsequently doped with zirconia to improve their photocatalytic performance. The physico-chemical properties of the catalysts, including structural, textural, morphological, and thermal properties, were studied using XRD, BET, SEM, and TG/DTA methods, respectively. The photocatalytic activity of the synthesized catalysts was tested in the degradation/decolorization reaction of methylene blue dye. The results indicated that the synthesis parameters and zirconia doping had a significant impact on the catalysts' physico-chemical characteristics and, therefore, their activity. It can be pointed out that catalysts with improved properties and enhanced photocatalytic activity can be obtained by carefully selecting and optimizing synthesis conditions, as well as by modifying or doping them with a suitable dopant.